We have an ASR 9912 router that is running IOS XR 64bit. We need to relocate an STM4 link from the older router (Cisco 7609S) to the ASR router to remove the old router from the network, as it is out of support for a long time now.What are the possib...
I have configured below configuration on NCS 540 Router for receiving dying-gasp snmp trap messages at my EPNM tool. Unfortunately I am not receiving any alert at EPNM tool during power outage but normal snmp traps alerts are receiving at EPNM. Howev...
Hello ALL, One of my clients is preparing to undergo a hardware replacement for their Chassis 9922. This involves swapping out the RP card; the existing ASR9900 RP card will be substituted with the RP3 card. Additionally, they plan to replace the SFC...
On an ASR 9010 running IOS-XR 5.3.3 (freshly turbo-booted): policy-global glbLocationCommunity '6', glbDefaultCustomer '100'end-global route-policy test1 set community $glbLocationCommunity additiveend-policy route-policy test3($p) set local-prefere...
I founed this log in ASR-9912 LC/0/7/CPU0:Dec 13 08:15:48.791 BKK: pfm_node_lc[297]: %PLATFORM-FCA-2-CLK_FAIL : Set|zllc[127026]|0x1046000|Device driver for device 'FMEA CLK DIAG' detected clock reference failure / DPLL unlock indicator on 'ZARLINK C...
I am trying to create a template script, but it's not working. Where am I going wrong?Template: create_l2if (if, vlan)interface TenGigE $if.$vlan l2transportencapsulation dot1q $vlanrewrite ingress tag pop 2 symmetricApply-template create_l2if (0/0/0...
Hi team, maybe who help me) I have ASA 5525. I want to write in the event manager if the ping is not successful (Success rate is 0 percent), then you need to execute clear crypto ikev2 sa "x.x.x.x" Check available IP once every 3-5 minutes. Maybe som...
Hello, is there anyone here who has a USB console working on these routers? https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5xx/hardware/installation/guide/b-ncs540-small-density-routers-hig/m-overview-ncs540-small-density-routers.html#id_75425 In my ...
I have a 4431 and when I reboot the router, it is stuck at image validated.I went into rommon and didconfreg 0x0 and did a rebootAfter the reboot, I did confreg 0x2102boot usb0:isr4400-universalk9.03.13.02.S.154-3.S2-ext.SPA.binThe system tries to bo...
hi I am running NCS540 with XR7.1.2 . Is there a way we can capture packets ingress/egress which are in the forwarding path . Also, is there any way to also capture control plane packets on this to examine them ? Please suggest. ThanksAseem.
Good morning, I need to know I require for activation TWAMP in ASR9010? Additional got these questions before setting TWAMP:1. If the ASR 9010 supports UDP Echo Reflector and how to configure.?2. If you need a specific license?3. SMU recommended to e...
Hi,Im running an xr box as dhcp ipv4 server for a lab validation setup. It works fine with one pool, but when using dhcp option 82 subopt 2 (remote-id) as match criteria to use multiple/specific pools, ie assigning ip from a pool based on matching t...
Hello,I am getting the following error message on an ASR 9006 router "vlan_ea[396]: %ETHER_EA-3-TCAM_REGION_OOR : Error during TCAM allocation, TCAM Region 3 has ran out of resources"How can I check which TCAM space/region is exhausted and how to che...
I'm having some issues establishing VPNV4 neighbors between two RR routersI hope you can help me solve this problem.thanks RP/0/0/CPU0:P1-RR#show bgp vpnv4 unicast summaryTue Dec 5 11:26:33.927 UTCBGP router identifier 172.16.1.3, local AS number 100...
Hello I am new to ASR and IOS-xrI am faced with securing the ASR-9K that is on the internet doing routing. I need to be able to lock down all services to each mgmt interface on each RSP Card. Can i get a sample config to help secure the asr? I tried...
