Hello, Cisco community,My Cisco UCS B200 M5 server is experiencing problems and does not detect an external storage array for the NetApp FAS 8200 connected via a Fibre Channel connection. We've tried a variety of troubleshooting steps, but the proble...
I have a huge number of vLANs in a UCSM environment which I believe are no longer being used and i would like to cull them so that only the used vLANs stay in UCSM. Is there a way to setup tracking for each vLAN so that I can see if traffic is flowin...
I have a C220 M4 that I attempted to boot from an ISCSI target from the embedded Ethernet ports.I can add the IQN with no issue.When a try to “Add an Attempt, I receive the following message. I checked the Network Stack – it is enabled, but I’m not s...
Cisco ACI (Application Centric Infrastructure) General Steps for the Installation of Cisco ACI Simulator: Download the OVA:- Download the OVA file from the official Cisco website or authorized source. Example of access with authorized login and pa...
The Cisco APIC Installation and ACI Upgrade and Downgrade Guide recommends using a long-lived version 5.2(x) or 4.2(x). However the APIC-M4 doesn't support either - “The Cisco APIC L4/M4 requires the Cisco APIC software 5.3(1) release or later or the...
For simplictiy, I'll refer here to L3out External EPGs by their external subnets, and I'm only asking about external subnets.What I'm concerned about is if I start with a contract that permits all traffic from ExtEPG_0.0.0.0/0 to some EPG1, and 2yr l...
Hello Bros' I have UCS system with Fabric interconnect 6248UP - Chassis 5108AC2.IFTA-FI - UCS Manager 3.1(3a). I have tried to send all system logs to a remote syslog server but still not receiving any. how syslog for the UCS works "UDP ...
When deploying new templates through Powershell I want to clone an existing BIOS policy and attach it to the new template. Unfortunately there is no clone or copy cmdlet. When I use the GUI logger to convert the api commands used to clone a BIOS temp...
Can any of the experts here shed any light on an issue we are having, it seems remarkably simple yet I cannot seem to work out a way around it.We are migrating from the world of Cisco Nexus/FEX to ACI and we have one particular VRF that I cannot work...
Cisco UCS PowerTool Core suite is a set of PowerShell Core modules for Cisco UCS Manager, Cisco IMC and Cisco UCS Central, that helps in the configuration and management of Cisco UCS domains and solutions. Cisco UCS PowerTool Core modules are develo...
A Field Guide covering the installation and initial configuration of Cisco Compute Hyperconverged with Nutanix systems using Standalone Cisco UCS C-Series servers managed by Cisco Intersight. This guide is intended for technical training and educatio...
Hi,We have not configured anything special regarding QoS.I do see on a lot of ports RX drops for the default qos class (level3).We see it on server ports but also on the uplinks from a leaf towards the spines.On the spine side there are no TX or RX d...
Hi Support,I'm currently deploying ACI Multi-Pod with a single L3Out in a single VRF. The L3Out connects a pair of leaf switches in each pod (pod1 and pod2) to our core network using BGP.To avoid issues with asymmetric routing with a pair of upstream...
Hi! I'm getting a response from the sandbox when getting the LLDP information for a node:```"lldpAdjEp": {"attributes": {"capability": "router","chassisIdT": "mac","chassisIdV": "fa:c2:90:1d:2e:50","childAction": "","dn": "topology/pod-1/node-101/sys...
Hi folks,This is driving me a little crazy! And maybe this is easier than I'm thinking through. I need to add a static route for a network we have that is on ACI ( a BD l3 unicasting routing enabled.) We used to have a static route on IOS but now I'm...