Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
i need a help,i want cisco unity 4.2 CD and license parc for 50 users part number,can anyone help
When leaving voicemail at the called party mailbox after CFNA, message is stored and can be played as usual. However, according what voicemail prompt said and to some traces I done, it appears like it was actually sent from the called party phone.Wh...
Does anyone have experience in setup CME and CUE in TWO different routers?Is it possible to setup in this way?User wants to reduce the sigle point of failure?Any input will be much appreciated!!Thanks!
I have a 64 meg flash and 64 meg slot0: Can I place IOS on one and CME files on the other and make CME work? If so, what else needs to be done?Thanks!!Gary
I am upgrading a Unity system (unified communications with Exchange 2003) that was set up by someone else from 4.x to 5.0. I have the login account and password for the OS (windows administrator), and I also have the account for the Unity web admini...
I have configured some call handlers however I can not remove the "Wait While I transfer your call.." I have ticked the box`s to remove it but still it keeps playing- any Idea what I`m missing. When you call into the Unity via Call routing it plays...
With a Primary & Secondary Unity server network attached to a Unified CallManager 6.0(1), when you failover from the Primary to Secondary, should the voicemail ports disconnect, or stay registered to the CallManager?
Anyone have any idea on how to control the Call Park Display message timeout? Have a requirement to have it stay on the screen until the call is either picked up or disconnected. I have checked all the timers I can come up with and no luck. I am t...
we are going to be upgrading a customer from CME and Unity express to Unity, and Call Manager 6.0 and they have asked if there is a procedure for saving the messages that are on the unity express, off to another device.
Hi,I want a huntgroup number to go to voicemail afterhours.I've tried it with schedules but the huntgroup keeps ringing. I guess this should be a simple thing but I can't find any documentation on the subject....I've got unity 4.0.4Any help would be ...
I have added a 7970 phone but I am not getting a dialtone it is not picking up the extension either. It get the correct Ip address and CCME address. !!!!!interface Loopback0 description $FW_INSIDE$ ip address 10.1.10.1 255.255.255.252 ip virtual-reas...
Has anyone installed Unity 4.2.1 with Windows OS 2003? If so, what version of Sql? thanks
I am trying to prevent a loop scenario. We have a SIP trunk to a Service provider and trying block the calls going out on SIP trunk if we received the call from that trunk. Some thing similar to CallManager config where CSS of trunk wouldn't have ...
Hi Pros,Unable to forward calls from IP Phone to PSTN. Am able to forward calls to other ip phones. Any clues?Attached config.
Hi All, I will be doing the upgrade and wanted to know if there's a way of saving all the call handlers, direct dialed and forwarding schemes, subscriber templates, schedules, etc... I will be running DIRT, however from my understanding, it will no...
