Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi I saw some threads on here about this same condition but could not find any that refer to Cisco SPA122 VOIP ATA. Is there some particular setting that could be causing this? It only cuts out when I call out, not when calls come in. thanks.
Hi All, Please help me solve this issue. I have to configure a cisco ISR 4321. But this routeur is no able to start. I got this error : Checking for PCIe device presence...%ERROR: Critical device not found on 00:02.00%WARNING: Resetting...Initi...
Jabber users are reporting that their smartphones (iPhone and Android) and becoming unregistered to CUCM after several minutes of no use. We are running v12.5.1 SU2. The users report they have not logged out of Jabber, but were using other apps and J...
How do i force a password change so i can log into this server?
Hi Actually I have 2 questions 1- is there any specific field I should enable for End users using jabber from outside at end user field or it the same like people from insidei am enabled these fields * Enabled User for Unified CM IM and Presence (C...
Hello,New to CUCM and need some help. I imported all users via LDAP sync, however, we are starting to migrate from one provider to another and about 95% of the users imported need to be deactivate, and will only need to be activated once their DID ha...
Cat heard favorite person after they had been off a week, dive-bombed phone, camera cover with lens shades went flying. Anyone have to put their camera back together? Not sure if I have all of the pieces, position of pieces and what order they go ...
I am trying to configure a CP8841 in call manager 12.5. As soon as I save the configuration, the config rejects. If I delete the new device config to start over and instead do a copy from a same model that is registered, I still get rejected on the c...
Is it possible to create a sip trunk grouping for a single outbound dial-peer voice? Something similar happens for E1 with (trunk group), so you can add a single dial-peer and apply the preference to sip trunk from different operators. Example:dial...
Hi, I’m having an issue with call legs. I have a CUCM with a Cisco Gateway (Version 15.0(1r)M16). Scenario: CUCM -> CIscoGW (Like CUBE) -> ITSP After some time I begin to see SIP call legs like these ones, and I can’t find a way to clear them. The on...
I am trying to modify our Universal Device Templates, and I'm having trouble with the device description. The current templates are about 5 years old and were created by someone else. The device description is currently #DEPT# - #FN# #LN# x#PrimaryEx...
Hello. I have a cisco router 2951 with 1 PVDM32, and I have 2 E1 each E1 connected to a different phone number, I have a question about dividing the 32-time slot between 2 E1. the current configuration :controller E1 0/1/1pri-group timeslots 1-16des...
I currently have a Line button, with FeatureID 20, and a ServicesURI with a 401.How I do to supply username and password to this? I tried with setting the authName and authPassword, but didn't work. Tried to set the username/password of the service t...
Hello everyone, Recently on my Subscriber services CallManager and CTI moved to status "Not Running". Please tell me what logs need to be collected in order to understand what happened. Perhaps someone will share advice on how to quickly figure out t...
Hello , I got error in the Cisco Prime Collaboration "SipTrunkBusyOut" what is the mean of alert? because the router work with MGCP protocol . my version of CUCM 11.5.1.17900. any idea?
