Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HelloI'm looking to upgrade a Cisco 2921 system to add additional BRI lines.The base system is a C2921-CME-SRST/K9 bundel (that has a PVDM3-32)The existing HWIC slots contain two VIC2-2BRI-NT/TE modules, and one VIC3-4FXS/DID module.(That's two 2-por...
Does anyone have a query built that would output the status of the SW and PC port settings on phone devices? TIA,Amir
Hi,I have one MGCP gateway kept in my LAN, One PRI/E1 terminated on router. I need one unused direct line for the call. How can in be possible?Thanks
Hi Some on please tell whether we can share a DN between the analog phone configured on FXS port & with cisco ip phone on CME.The fxs port is configured on the CME.
All,I am encountering an issue where one of my branch offices are experiencing one way audio when communicating with another branch office. This office can dial headquaters 4 digit and have 2 way but one way when 4 digit dialing to another site. An...
I installed cisco unity connection 6 to provide voice mail services, the install succeeds but i cannot login to the web interface. I keep gettinginvalid username and password. I know what username and password was used during the installso something...
Hi All,Today I faced some unknown problem with CUCM LDAP sync with MS AD.As, the scheduled sync process works fine, that means if the client add a new user on their AD it not gets reflected on CUCM by doing the manual dir sync i.e. by doing Perform s...
Dear All,we have a problem in voice quality ,we use cisco as5350xm and use our special software as a PBX. also there is a very heavy traffic of calls which are handled by operators. but the only problem is the noise in the calls. there isn't any echo...
Hi, Are there any cool tools out there that will allow me to perform license capacity management for my Call manager and unity connection. I am looking for something that will provide graphs and display a trend.Thank you
Hi All,I am in the process of integrating a cucm 9.1 cluster with a cuc 9.1 cluster. Some confusing points that i hope can be clarified.for cucm1. I have created one voice mail server with 48 ports that will accomodate both cuc serversfor cucI have...
Hi,Just want to know is there any tool or an application wherein we can create the Voice Diagram for CUCM. Need to have a detail description/flow chart of CUCM Servers, Groups, Region, DP etc. A diagram which clearly briefs about the setup.Pls sugges...
Hi All,Can we integrate two ADs with single call manager cluster?any reference DOC,please share.regds,aman
Hi I need to write translation rule for following requirement original number 28xxxnew number - 09467xxx (replace 28 with 09467, only remove 28 from 5 digit number and add 09467 to it)Please guide Regds$
I have a DID that is not mapped to a user or line. I want any calls placed to that DID forwarded directly to an external number, how would do I go about doing that? Thanks
All,The below is the configuration on our router and we are using Avaya phones on the network .The phones are not receiving dhcp leases and not working ,can anybody suggest what is causing this issue.Building configuration...Curren...
