We are unable to process uncoming calls but outgoing works fine.her eis what we see from debug isdn q931 Bearer Capability i = 0x9090A2 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mo...
We are unable to process uncoming calls but outgoing works fine.her eis what we see from debug isdn q931 Bearer Capability i = 0x9090A2 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mo...
Hi,I have a cluster (PUB + SUB) running 8.6.2.20000-2 version.EM phone service is pointing towards subscriber.I have a situation that appears to relate to a DB replication malfunction. Even though, if I go to Cisco Unified Reporting > Unified CM Data...
Hi EXPERTS,Good day!We have a center that is using a CME router, and having an issue with this one extension which is 4783. The configuration in this extension is disappearing randomly. Hope you could help me figure out this issue. See config below:...
Hello!I've heard that now (from CCM 8.6) it is possible to route calls via A-number.Could you show me how to do it?BRDenys
Hi all,We configured fractional E1 on our MGCP gateway (1st 10 channels only).My question is: Is it supported by Cisco? If any problems happen, do I get support from them? (and if possible, anyone can show me the documents/sites indicating that the f...
Hi All,Is there a way to pull registration status for media resources from the CLI Sql query?i the goal here is to pull a list of the unregistered media resources.Let's say that a change will happen on the CUCM environment, by RMTM i can find the num...
Hi, is there a way do distinguish a 2821-v/K9, 2821-vsec/K9 or a 2821-vsec-ccme/K9 from the CLI?I have to buy a smartnet contract and I would like to check which is the exact version of the router....Many thanks in advance
Hello, I have a CUCM 8.6 running on VM which have a hard disk space of 500GB if i want to clone it with a smaller disk space so not everytime i do a backup it backsup 500GB, will i need new licenses for it to work after the clone?? or the current lic...
Wha is the bandwidth of E1/T1 if it's used as WAN link?
Hi all,Recently we have been facing issues with Cico IP phones, they frequently reset/restart without our control or any apply config. Does anyone else have the same issue? Any ideas for troubleshooting is appreciated.Device logs are provided in the ...
Anyone happen to know the part number for a 2GB module?Thanks. Replies rated.
Trying to insert users using the following format text file:---------------------------- File Contents ------------------------------------------FIRST NAME, LAST NAME, USER ID, TELEPHONE NUMBERJames, Smith, 123456, 1235551212Bob, Williams, 123457, 12...
Hello guys,I have 2 VG224 in my network, and I use this with CUCM 7.1.3.32900-4 integrated by SCCP.The IOS version is: Version 15.1(3)T3 (vg224-i6s-mz.151-3.T3.bin)The problem is...Some port don't have dial tone and don't ring when extension is calle...
Hi,How to configure E1/T1 to send data? Can anyone give me the commands?
I am about to implement a new CUCM and half the site users will be on the old CUCM (v7.1) the other half on the new CUCM (8.6) they will call each other over an inter cluster trunk - whats the best way to handle CAC in this situation? as calls made ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2025 05:48 AM | ||
04-24-2025 02:49 PM | ||
04-15-2025 02:12 PM | ||
04-15-2025 10:57 AM | ||
04-15-2025 03:40 AM |
User | Count |
---|---|
3 | |
2 | |
1 | |
1 | |
1 |