Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
We have 15 sites using CUCM and I was wondering what the best way to setup MOH? We are using h.323 gateways and I have an MOH server setup in CUCM but have been told that doing it that way would could possibly cosume alot of bandwidth at corporate. I...
I have reviewed the other discussions and I still don't get it. I am running CUCM 8.5 and want to integrate with LDAP. I will have the ipPhone field filled in on all the accounts I want to sync. I also need to include inactive accounts (m...
I'm running communications manager 8.6.2 and I have a need to setup a service for speed dials on a 7965. The 7965 has 6 line buttons. I need to use 5 buttons for line appearances and then I still need to assign 8 speed dials to the phone. I wanted...
Hi guys,is it possible to setup the initial Cluster Security Mode with only one etoken?It is for my homelab, and if the etoken is lost ore damaged, that doesn't matter! I like to keep my lab cheap!Regards Paul
I try to go to my directory, but I'm getting a "host not found"I’m checking the network configuration of the phone.Under the Phone network configThe Directorys URL is pointing to the wrong addressRight now it is pointing to https://10.200.0.17:8080/c...
Hi,I have configured CUBE on a 2900 ISR to link to an Internet Telephony Service Provider and want to make sure that it is secure.I have connected Gi0/0 to an inside VLAN and Gi0/1 to the public Internet with a registered address.So far for security ...
We are running CUCM and when we lose connection to CUCM, CM fallback is enabled. The rpoblem I am having is that the phones are allowing me to only dial 4 digits. We are using a h.323 gateway and everything works properly when connected to CUCM. What...
Hello all,I was wondering if anyone knew what type of card would be required for a Cisco 2921 to emulate a point to point T1 using CCIS coming from the NEC 2000?Thanks,Matt
Hi all,I've problem calling to 800 toll free numbers. I'm currently using ISDN 30.I can make calling to 1800 toll free numbers no problem. But everytime I call 800 numbers I got the following error.Called Party Number i = 0x81, '8004481627' ...
Hello experts,I am in need of some guidance that I am not sure on how to proceed. We have three users all with a shared DN. One of the users has the DN as her primary extension (User A). We are trying to configure the line so that when user A is on a...
We are trying to convert some of analog lines to our CUCM 8.6. Anyone knows which Cisco ATA should be use that support Faxes?Thank you
Our company is using Cisco IP Communicator 7.0.5.0 over Cisco AnyConnect Secure Mobility Client Version 3.1.01065.When one individual calls another, the call is connected but there is no audio (we do not use any video features). This occurs only whe...
Hello Experts,Had any one ever got FAC working for FAX or Analogue Phone?If so, what to do it?Thanks Yen Lung
We staff phones and customer phones in one location. Staff phones have a mask of 888987XXXX and customer phones have 888789XXXX. When customers place calls the recipient is getting 888987XXXX even though the external masks on all customer phones is...
Please help! I have a translation pattern configured to route calls for ext 4200 to an external number when a Time Schedule (TS_Closed) is invoked using a PT_Closed. The Time Schedules includes the following Time Periods:Closed Time Period:TP_Evenin...
