Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have got a CISCO 7940 with SIP firmware.Is possibile to power off the display (like a screensaver...)?
I have to implement a VoIP solution for a new facility which will house 150 users. If I use Cisco's solution, what do I need to get. Basically, I am trying to come up with a shopping list to implement Cisco's VoIP solution.Thanks,Mohamad
Hi,I have a question regarding phone display messages. Is it possible to customize the message, that is beeing displayed when pressing the DND Button?CheersMoe
I have a non-gatekeeper ICT with qsig between 2 CUCM clusters, one running 7.1.2, the other 4.1.3. Unity is connected to the 7.1.3 cluster, and call from the other system roll over to Unity without problem on busy, and no answer scenarios. The prob...
hi! Is it possible to enable password for outgoing international number on a paticular ip phone only and the user is still able to call local number without passcode? If yes how can that be done?recently, we've issue our call attendant number (the co...
Guys, in the compatability matrix for CUCM v8 it shows the minimum supported IOS for the 2800 voice gateway is 15.1... Is this correct, so v 12.4 will not work with CUCM v8?Is the 15.1 upgrade free to download or are new licenses required?Many thanks
I know on the phone's external mask configuration whatever is configured here gets displayed in the upper right corner of the IP phones. I do not want that number to display.For example, we have a block of DIDs designated for E911. Each phone has one...
Guys, i am upgrading from version 4.1.3 to version 8.. My plan was to upgrade to version 7.1.3, import customers DB and then upgrade to 8. The problem is the new hardware has arrived with version 8 pre installed. What is the best option to me now?Can...
Hi All,We have CCM ver 5.1.3 and users have 7911 phones.For the speed dial numbers, users are able to see the names/labels on the phones.However, for the AbbrDial numbers, users are not able to see the names/lables on the phones when they dial (thoug...
CUCM 7.1(3) with 2811 ISR 12.4(13r)T11I opened a ticket with Verizon recently because all calls originating from CUCM were showing as having a caller ID of the main number instead of their DIDs. When testing I found out that this was not always the c...
How do I get a report for an extension? I am trying to get a report that shows inbound and outbound calls from an extension.
Dear ALLI have two questions hereFirst what is the procedure to upload a csv file for phones?i mean from the bulk administration to upload at the same time many phonesAnd the second is: How is the correct procedure to export from CUCM 4.X phones and ...
hi,we are in the process of integrating SIP Trunk with CCME,if any one as a working configuration of SIP trunk configuration with CCME please forwardwith thanksedwin
Hi All,Where is the best place where I can find out this information and other information regarding the 2851 running CMESent from Cisco Technical Support iPhone App
Hey All,Wanted to run this by my peers to see if this is doable or not. Basically I have a centralized cluster with multiple CUCM groups (between an 8 node geo-cluster) and I am trying to figure out if the following is possible. With Local Route Gr...
| User | Count |
|---|---|
| 6 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
