Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,Attendant console is setup with CCM version 4.1(2). Working fine. Problem I am facing is with Call Park...Able to park the call but it is not diaplayed in the Call Park Window of the Attendant Console screen (It is displayed on the associated phon...
HiWith regard to setup of intercluster trunk gatekeeper controlled, it has a setting for QSIG, is this setting not used.How is it used for Gatekeepr controlled when the h323 messages all go to the gatekeeper.Please advise what the QSIG config is used...
I operate publisher and subsidiary call managers and both run with 1 m memory, Publisher runs/takes up consistently 85% and subsidiary runs 45-50% range. I plan to upgrade the memory. can I just upgrade the publisher only to 2m??
i am facing one issue with one cisco ip phone 7960 regarding call forwarding .my ccm server is 4.1.3 versioni am attaching the cdr error report and normal cdr report with this. normaly call type is simple in cdr . but in the error phone i am getti...
hi folks can somebody send me cor list configuration example in real time scenerious like blocking intenational dialing etc.for ccme 3800 router.m finding some problems for d same.
Hi,Please let me know where to find the Welcome to Meeting Place wav file on the MP & how we can copy that.Sumanth
CCM version 4.1:MOH source is .wav file on subscriberI've changed the MOH db level to -48 (the lowest setting) and restarted the MOH service on both subscribers.The volume stays the same.Any ideas?thanks,Scott
Trying to change the MOH on Directory numbers. Go to update phones, add directory number. "Add to Query" under Paramiters select "User hold audio source" go to value select "source" then "Set Value" check reset devices. At this point I can view resul...
We just purchased 40 or so 7911 phones. I went to add code for Device Defaults and found no 7911 option. Programmed phone as 7912 and is regected. How do you add 7911 to 4.1.3?
We have noticed that the 7200 VXR is no longer supported as an MGCP gateway in CallManager 4.2. We used to like the VG200 as gateways, and they are still supported in 4.2, they are just End of Lifed from Cisco. So, no low end VG200 and no high end ...
Does anybody know this? Thanks
Is there a CLI command to see how many licenses were issued on a call manager express router running CME and voicemail boxes in CUE?Thanks,Rob
Hi,I write an ipcc script to queue incoming calls and transfer them to a ready agent.It works fine. But if agent intercept a call of an another agent, agents state don't update (perhaps because this action go out the script).So My question is: Is it ...
I have a CCM with the CDR application installed by someone else who forgot the login user and password, can I recover that information?
I'm in the process of adding phones, users and so on using BAT. I'm in a situation that I need numbers called during the day to go to voice mail. The way we have designed this is that we use CTI route points that are forwarded straight to voice mai...
