Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I configure Cuma and I'm stucking in the step Active DirectoryWhen configure Exchange LookupThere are some value that I don't understandThey are :- Contact Adapter- DNS Host Name- Contact Adapter DN Mask- Contact Adapter Search BaseMy Active Director...
I have CallManager connected to a gateway at one site. On the other site I have CME. When I do a call from an IP Phone on the CM to an IP Phone on CME, the call rings out at the other side. But when it answers and the phone displaye connected. The IP...
Good Day All,I have an end user who has requested that the MWI indicator flash when a message has been left on the phone.The phones are deployed in an aged care facility.The Cisco Call Manager cluster is running version 4.2 and Unity Connection 6.1.I...
If a GK have a bunch of end h323 terminals registered to it and you don't want the call to directly call each other for the purpose rating/accounting purpose that the call needs to signal a billing platform, how can I force GK when Site1 dial Site 2 ...
Hi all, I am using cisco phones in my office. The 7912 phone is not working.. Both the red and the green leds are lit,but with no display. When I connected the phone to netwrok with one jack to PC and the other to network, my PCs netwrk goes down...
Hi, We're having problems when users forward calls to the PSTN and the originating caller is also from outside our network (PSTN). For example:caller 1 (PSTN cell phone) calls into internalcaller (Joe)Joe's phone set cfwdall to his home numberanyone...
I have some basic questions about CUCM call flow with a SIP CUBE router, if anyone has a moment, please correct anything that is wrong.Here is my understanding of the flow:1. The called number matches an inbound dial-peer and applies the associated t...
HI,Is there anyway to run a report or look at which DN's do not have an external mask configured?Thanks,Randall
Hi all,i have configured some free XML services for one of my customer on CUCM 6.0 which are available free on internet. customer has protected the internet access via proxy. If the ip phone has to go on internet it will be pass through proxy,Now ho...
Hi, I've finally received my licence for 8 and we're currently running on 7.1.5 which doesn't appear to support direct upgrades. Short of rolling back to 7.1.2 and losing any changes made in the last 3 months, does anyone have any ideas of an upg...
My goal is to translate (strip off 3 digits) all calls coming FROM a SPECIFIC GATEWAY (in this example, rtr 1720) leaving 7 digits. I have the following on the 3945 RTR:voice source-group V1access-list 50translation-profile incoming verso-in!voice t...
Hi,CUCM users have two deivces that Physical IP Phone and CUPC softphone (UPCXXXXX) which are share the extension.in CUBAC client attendant console screen, I added two icons in [F3-Internal directory] screen that Presence and Phone status but the Pho...
Does any one have qos and switch configs related to HP Switches running Cisco UC ?specifically models such asa. HP Procurve 5406zlb. HP Procurve 3500yl
So I am adding several new PRI’s to a voice gateway over the next month. I use the DSP calculator and do what ever it spits out as far as DSP requirements but I got to thinking about what it said and did an inventory on some of my other gateways and...
Can a physical phone can be assigned a CLI when it dials 999 which overrides an extension mobility user CLI So when a user dials a standard number from any phone is shows the SNR CLI but when they dial 999/112 the CLI of the site is displayed- so em...
| User | Count |
|---|---|
| 8 | |
| 4 | |
| 3 | |
| 1 | |
| 1 |
