Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have Added 2 Non-cisco SIP IP phone to my cluster I have followed the document work fine I had both phones registered but here is the issueI could call any phone in the cluster but I could not make a call from the cisco IP phone to the Non-cisco ph...
Hello all,I have seen a couple posts (2002 and 2006) that say you cannot bulk unsubscribe. Is this still the case. I am running CUCM 7.1.3.32900-4Thank you for your time,Jeff
Hi Everyone !!I have a cisco 1751 router {IOS 12.3(26) } with PVDM12 and VIC-2FXO Card connected to the Call manager using H.323Both PVDM and VIC-2FXO are detected but while router boots up I am getting the below error=========================Jan ...
Hello Y'allI am having problems hearing the other person at the end of the line on pstn calls. The CME has a VIC2-4FXO module and I have the PSTN connection trhough voiceport 0/0/0The pstn calls terminate on ephone1 which is configured with connectio...
I am running CUCM 7.1.3 and I am wanting to write my own web application that will let me query data from the CDR database. I keep finding resources that show on the older systems (when they ran Windows) you would just connect to the sql server and q...
HiI have worked a CUE module and it is integrate correctly to CM 7.0, the question is ¿Can the CUE reproduce the number from where I recived the call?, actually only say call from unknow number.Thanks a lot Marco
I have a quick question for the forums:One of our employees has left the business, and a new employee has been hired in her position. I went into CUCM, and added a new End User. I added the primary device, but it didn't seem that anything had happe...
Hey guys,I'm having problems trying to figure out how to get video to work with a 9971 and CUPC 8. The 9971 of course has a USB slot that the camera goes into but I'm not sure how to get this set up with CUPC 8 as CUPC does not see the camera since ...
I cannot for the life of me figure out how to remove the "Alarm bell" that appears on a phone so I can reconfigure it for another user. I'm having a brain slip, usual day for me. anyone have an idea?
Hi guysWe are change the PBX NEC for UCM 8.0The PBX NEC has 2 ISDN PRI and 2 extensions are VideoConference. The both ISDN PRI receive voice calls and video calls. How the router do to known if is a voice call or a video calls? Is there a particular ...
Hi! We have a customer who wants to allow Offnet to Offnet transfer (they realise the Toll Frad risk, but insist for various reasons). A part from setting "Block Offnet to Offnet transfer" to False in the Service Parameters.Do I need to change the RP...
Hi alli have big problem so i need your help.-------------------------------------------------1. FXO -----VGW---ip phone2.fxo ------other vendor phone (direct connect) pass 100% successbut, we debug 1. VGW however we can see calling number.sometim...
Dear All,I am trying to integrate CUCM 7.1 with unity 7.0. i have completed the configuraiton in CUCM, In unity connection when adding the AXL Server when i click on phone system and click on EDIT cisco unified communications manager AXL server is no...
I typically use 1XXXX for system numbers, but I have a situation where we need to use [1-8]XXX for user extensions. I don't want to simply lower the inter-digit timeout and use 1XXX. So, I see my obvious option as:Use 1[235]XXX for system numbers a...
Hi,Like in IPCC express- agent, whenever the agent held the phone for a time period, can we take out any logs or report for that particular time (hold time of agent)regardsGaurav.
