Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have recently change from CCME 4.1 up to8.0 and was having an issue with a 7941 phone load. Thought was to factory reset the unit so that it pulls the latest load form the CCME term41.default.loads.The factory reset procedure works fine but when i...
Hi... when i try to realize a conference in the phone show me this message "No conference Bridge"
So I started my lab over and it's been awhile since i've setup a call manager server, but I decided too and now i'm running into a issue with the following things.1. Phones will not get DHCP addresses. I have to manually assign IP info to phones then...
Hi All,we are deploying CUP with CUPC. is it possible for receptoinist to change presence status on behalf of end users? for example if someone goes to lunch, receptionist changes his status to non-available.thanksAlex
Guys,running into a wierd issue where my CPU utilization is going over 90%. processes showed CCH323_CT as the process taking 48%. sent the show command to output interpreter but it advised that it could see a high utlization but no process was causin...
We are running CallManager 7.1(5) and the Administration page will not load. I tried to restart the Tomcat service but had not luck. I went to the console and it is scrolling the following message:ext3-fs error (device sda6) in start_transaction: Jou...
Hi,We need to generate a missed calls report from CCM 4.2CDR flags are enabled and "Log Calls with Zero Duration" flag is also enabled.The problem is that all missed calls are logged in the CDR with a Date of "0". The "dateTimeConnect" is always Zero...
My customer has Call Manager 7.1 and he asked me if is possibile (for external inbound call) hide the calling number only for certain user.Example:I call 012345 and he can see my number.I call 154321 and he can see my numberBehavior hoped:I call 012...
This is my architecture:BRI -> Voice Gateway -> PBX via PRI -> Fax Everything works fine, but the only problem is that when I have to receive fax with multiple page I receive only the first.I don't know why, can you help me? Can I do some particular ...
How in "extended get digit string" use only numbers "181" "280" "191" ?
HiI have already configured voicemail service using CUE.I want to receive notification in MS outlook inbox when i receive voicemail.I followed the steps mentioned in guide to receive notification in email inbox and receive voicemail as attachment but...
Hi,I´ve recently migrated 3 branch offices of a customer who has a CCM cluster 6.1, and on everyone of them the model is the same: IP Phones and ATA186 to replace phones, a 2960 Poe and a Cisco 2801 to be DHCP server and SRST for phones, and GW to PS...
the Plantronics corded H171 & H171N with Amp 26716-01 and the Plantronics cordless CS50, CS55 & CS70 were recommended in a thread in 2007 for the 7941 phones. Is that still the recommendation in 2010 for the 7941 series phone???
Hi,My two ip phones (7941G and 7961G) are placed in EAP-FAST 802.1x authentication after 8.5.4 firmware upgrade, but i need test EAP-MD5 and EAP-TLS, can someone tell me what i need configure?. I have ACS 5.1 and CUCM 6.1.Thks
Hello,I'm trying to find out if it's possible to delete all VM's from a subscribers Vmailbox without having to kill the Vmailbox and recreate it. The system is not integrated with a back end mailstore. I've read up on configuring IMAP to download t...
