Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,In the following data sheet:http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps10030/ps10031/data_sheet_c78-504126.htmlI've read that the SPA9000 has one FXO port. Is this device a PSTN to VoIP gateway? or It needs a SPA400 to...
We need CP-7960G CISCO IP PHONE Password breakingplz help me.
We have route patterns configured for 911 in our CUCM cluster, 6.0.1. When you dial 9.911 it uses a Route List and Route Group and routes the 911 call out the local POTS line on the remote MGCP Gateway instead of the central sites PRI. My question is...
Is it possible to configure a distinct external phone number mask per extension on CME? My outbound connections are FXO lines.Thanks
Hi ;manage configure EM for CCE 7. When i login from one of the IP Phone C7942, it manage to login but i have to press 3 x "Exit" button then only to right extension page. By right the extension page auto come out once you login right ? what is missi...
Guys,Hope you are all having a great Christmas and/or a great holiday. But some of us are working and have come across a slight issue with BLF. I am trying to run it in the Speed Dial setting not the Call Park.To use this feature do you need the sepa...
The attendant console (AC) is disconnected when one this specific phone is offline. I am not sure the history but it seems that this phone was built and tied to the AC. The reception is currently using another phone. This phone is located in the ph...
We have Unity 4.0.5 and CCM4.1.3. We have a CallHandler that gives our callers the option to dial an extension any time during the greeting message. If the caller dial's an extension that does not exist in Unity, the system then plays a message say...
Callmanager business edition 7I have a user who does not want his ext number to be displayed to those he is calling. Can this be done
Hello,We are currently on a ISDN2 Line, but we want to switch to ISDN30 or SIP Trunking.What kind of hardware do we need to purchase for our Cisco 3825 Router for ISDN30 or SIP Trunking? I'm thinking of a PRI card for the ISDN30, but I don't know whi...
I have a 2811 running CME 4.1(0). I have a new 7975G phone I am trying to configure for it. I've downloaded the cmterm-7975-sccp.8-3-2.tar file and archive extracted it to the router flash.I have configured all the tftp-server statements for each u...
I have a 7.1(3b) cluster. I need to add a new server to the cluster. Can I add a 7.1(3) to a 7.1(3b) cluster and later do an upgrade to 7.1(3b)?Any version limitations when adding a server to a cluster that does not match exactly the cluster version?...
Hi,I am using callmanager 5.1, In our organization we have more than 200 ip phones, i want to call simaltanuisly to all phone give some information to users.how do I do this. Please help.Musavvir Ahmed
Hi,I have an issue with H.323 configuration CUCMBE 7.0. Inbound call is working but outgoing call to PSTN is always give a busy signal. i'm using FXO port for the call. Here is the config of the router:MEDWAVE-GW01#sh runBuilding configuration...Curr...
hi,i have installed cucm7.0 (ccmpub and sub)..when the ip phone 7970 registers with the ccmpub it shows "SCCP70.8-5-2SRIS" "auth fail" and "local authentication failed: SCCP70.8-5-2SRIS" error before registering to the ccmpub server. but when i remov...
| User | Count |
|---|---|
| 15 | |
| 12 | |
| 6 | |
| 4 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
