Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hi all,one of my customer required different voice msgs based on different conditions, e.g. " if he is busy then caller should here voice msg that im busy at a movement please leave msg " or if he is in meeting then caller should here msg that " im b...
Hi All, we have 3845 ISR router with 4 full PRI. I need to configure MTP in the router to support incoming fax support to communicate with Microsoft Exchage to receive fax. there are one PVDM2-48 and one PVDM2-96 installed on the router. so (112-96=1...
Hi,I have one doubt, i can integrate nokial phones with CCM Version 4.1.3.If its possible pls share some information about it.Regards,Sunish
infuriating, I recall seeing a thread on this but cannot recall the detail. I would like to display the full DID number on the top line of the phone <area code + number > yet have only the extension number < last five digits of DID > appear on the ...
Hi, i need help to configure a sip trunki have a cisco 2811 with CME and recently bought a sip trunk with a local provider, but i cant get it works.. pls helpthe provider said that The sip trunk dont have security, just this parameters to configure.d...
When call forwarding a voip phone out to a PSTN number. when we place a external number mask on the Route-list configuration, the XXXX portion of the number shows up as the last 4 didgits of my external caller. When I do the Q931 debug, it states pro...
Dear Networkers,I am planning to implement the singke number reach on our CCM 6.1.3My question : Do I need to a mobilty server additionally to CCM ? or with only CCM I can implement this feature?Thanks in advance.
Dear networkers,We have CUCM 6.0.1.2000-3 installed at the customer site.When trying to purge manually the CDR database, we have the following message : "Reloadproccess is running.Please wait till the Reload Process is over". (see attached screen sho...
Hi,We are trying to get a fax server solution working between CUCM and our SIP provider but it seems the fax server only supports T.38 and the provider only supports G711alaw.Fax Server (t.38) <-SIP TRUNK-> CUCM 6.1.3 <-SIP TRUNK-> Service provider (...
Dear Networkers,I have CCM 6 installed.Since some days i noticed that there is a phone that i cannot change the owner user ID. this filed is greyed for this phone.(as u can see in tha attached screenshot)Can you please help me how to enable this fiel...
7941G Phone has had the factory default sequence sent to it, now the handset has headset/mute buttons lit solid and lines buttons are flashing? We are able to ping the phone.Is there a way to restore the phone to normal service?
Dear Networkers,I want to configure SNR function (Single number reach) on our Callmanager cluster (version 6.1.3).I can't find a document guide to help me during the configuration.Can you please help me? Does anyone have a link to donwload/read such ...
HiCan Cisco Unity Connection Interview Handler be used for 'customer satisfaction surveys' ?This is for a Contact Center Express (UCCX ver 7.0) environment - after an Agent completes a call the 'customer' is directed to the Cisco Unity Interview Hand...
Hi,We are using CME 7.0 with IOS 124-24.T1 runnning in 2851 , we are having 7962 and 7942 phones along with CIPC but everday we are facing the problem of CIPC state Deceased for some phones only (all of the MAC is added already) we need to reload the...
Hi All,I've inherited a few older 7960 SIP phones and I am in the process of converting them to SCCP for our CUCM 7.Unfortunately some of these phones are password protected and I can't unlock them.I really want to factory default them first.The proc...
