Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Basically, if I have call in progress with an h323 gateway from CUCM, will the call stay up if I lose a Subscriber? Right now, I have a Pub and Sub. When I have a call in progress, and the subscriber goes offline, the current call drops. Seems to ...
Trying to register a new Conf bridge with CM 6.1 and it shows Registration "Rejected". Here is the GW config. Ideas?sccp local Loopback0sccp ccm 10.224.13.12 identifier 2 sccp ccm 10.224.13.11 identifier 1 sccp!sccp ccm group 1 bind interface Loopba...
I have a T1-PRI tie line between the PBX(Avaya G3) and my Call Manager 5.1 w/2811 voice gateway. The issue is getting the caller-id to work on calls coming from the Avaya. The company that handles the Avaya says they are sending the Caller-Id but all...
Is there a way to give users a wider selection of ringtones on lines 2 through 8? Currently Line 1 gets all the basic selections, but Lines 2 through 8 get only only static options labeled "Ring 1, Ring 2, Ring 3, etc".
Here is what I get in the event log. Unable to read the disk performance information from the system. Disk performance counters must be enabled for at least one physical disk or logical volume in order for these counters to appear. Disk performance...
Will COBRAS preserve subscriber passwords when you migrate from Unity 4.1 to Unity Connection 7.0
MobileConnect is fully working for this customer..We are having a problem with Caller ID not showing up correctly on the users cell phone..What works....- Call from ext to ext, shows the calling ext on the cell- call from dedicated DID to extension s...
Hi all,I need some help selecting the appropriate hardware for a VoIP solution. I am a totally new when it comes to VoIP so please take baby steps with me. (Sorry for the long note but I want to explain it as best as possible.)The situation:We have ...
HelloI need to block some outgoing call destinations placed from an specific ephone *only*. Which would be the best way to do this? We're running CCME 7.0 w/ CUE 3.2.Any tips will be apreciated.Thanks in advice.Guilherme
hello,i m using cisco 2801 like SRST. the actual version of ios don't support cisco 7911 ( see the attachement).please can you tell me which ios version i must use?Thanks in advanceHicham
How do you get a call handler to actually use the transfer option in with Unity Connection 1.21If I set a call handler to transfer to an extension during the day under the Transfer Options the greeting is still played instead of tranferring the call.
Hello All,Does Cisco offer "Soft Modem" solution? If so, could you please point me to some details?Thanks,MK
Dears, I want to register my 7940 SCCP phone from my home to office call manager. I have created Access-list on ASA to permit signalling protocols to register the IP phone. The phone has getting the TFTP loader but the phone's call manager IP is the ...
can someone tell me what the standard trunking options are this product?Ie number of FX0 - Pri - Sip trunks....
I see that CUCM selected for some phones default CSS on line, not on phone. How I can select all phones to see are there any CSS on lines?
