IP Telephony and Phones

Need some insight on how to configure T1 CAS for international calls outgoing.Dial-peer configuration is as follows:dial-peer voice 120 pots description International numbering-type international destination-pattern +011T port 0/1/0:1 forward-digits ...

Hi, My voice network is using h323 gatekeeper. i have about 15 of the 20 gateways registered. When the user dials a number he get the dial tone and it's silent. I have tested from the router a valid number and did some debugs but i do not get to reje...

We are using the evalutaion version of CUPM 1.2 We cannot find the following attributes in the batch provisioningset owner user id, alerting name, common profile, and subscribed services.CVPT could do all of the above except common profile. anyone e...

Hi I am having 4 numbers of ATA 186 out of which 2 had been configured on UCM 6.0 FAX is connected to one of the ATA and a analog phone is connected to another ATA. The problem is When someone calls from outside sometime the phone/Fax rings, and some...

Hello,I would like to enable the alternate TFTP server option for the phones part of Communication Manager 6.1 cluster. Can I configure this option for all phones using a DHCP server? I already have configured the Option 150 (for the Pub IP) in my DH...

I have a user on a subscriber on my cluster that can not access voicemail by pressing the message button. When pressed they recieve the message:"Example Administrator is not available record your message at the tone"

Does anyone know how to get the correct attributes into the line text label and display for a user created with EM Line.I am setting ${FIRSTNAME} in the provisioning manager attributes, but it just puts in exactly that in the field, rather than repla...

I'm setting up a UC520. I have one analog line from POTS that is dedicated to fax. I have terminated that line on FXO interface 0/1/3. I have ran an analog telephone line from my fax machine and terminated on FXS port 0/0/0. I can make out fax ok, bu...

Has anyone heard of a way to put a toneahead of a transferred call to tell the answering party that the call is present and they can say hello. I had a request for just that. I assume it would be like a conference call barge in tone.ThanksArt

Is there a manner by which is possible to activate and configure the address of a remote syslog server without the need to go through all cluster servers, all service groups and all services ( which is a very log boring task )Thanks.

Hello All,I am building an IP Telephony solution for one of my customers for 15 users in Shanghai. The solution that I came up is using a UC520-48U-12FXO-K9 with a WS-CE500-24PC but they want to go with a WS-C3750G-24PS-E which is the standard that t...

CUE 2.1.3 I am attempting to transfer a call directly to voice mail. I have created a general delivery mail box 8607 with e164 # 28607. Our direct to voice mail pattern is 2.... My debugs indicate that the call is reaching the CME with the called num...

Hi,I read many topics but find anywhere a workaround for my pb.I had upload the french Locale installer ( cm-locale-fr_FR-6.1.1.1000-1.cop.sgn ) on the CUCM (6.1.2.1000-13)The IP phones can be in french (user locale option ) but not the CIPC ( softp...

Hi,last week I upgraded a CUCM server from 5.1(3) to 6.1(2).Now I do have some issues with VG224 (doorbells).The VG224 are connected via MGCP.IPhone - VG224 - AnalogPhone (doorbell)Send “0#” ---->>>If I am connected to the doorbell - I should be ...