Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
2851 Router came in with CCME and CUE installed. IOS 12.4.6 and cue 2.3. I want to integrate CUE with CCM 4.2. Is it possible? I found this statement I am not sure exactly what it means and how it is done.Note: There is no method to convert or back u...
All, I am up for a few CallManager upgrades. I am still somewhat new to IP Telephony, so I was wondering if someone could tell me how long a typical upgrade might take? Im upgrading from 4.0(2) to probably 4.1(3). Anyone have any ideas?Also, If I ...
A customer has 7961 with 8.2(1) phone load an the abbreviated dial softkey is not available once he puts a call on hold, however he can do this from a 7960 with running 8.0(3). Is this a bug with the phone load. I will try load 8.2(2) to see if it fi...
who has the configuration regard integrated call manager express as a brance to work with cisco call manager located at HQ
Hi, In my 7940 IP Phones , I need the max line to be 4, but the phone should give busy trigger when one call is active.I tried by changing the Max line to 4 and the busy trigger to be 1. After doing this, I am getting a busy tone when I have an acti...
Somebody called 911 just for fun, and we are trying to trace from which extension it was called from. What log can be checked in CCM 4.1(3) to track it.
Hi, I have a CCM installed with 5.1(2) and want to upgrade to 6.0(1). Can anyone tell what's the procedure to do this? Do anyone have any step-by-step instructions guide to do this?Thanks,Manu
Hi, I have some 400 IP Phones registered to my Call Manager version 4.1. I want to take the details of all the IP Phones from this Call Manager like their DN, Partitions, CSS, Alerting Name etc. Can anyone tell me whether I can take this by some meth...
Hi, I am having two trunks to my remote location. One in G.711 and other in G.729. I am having analog phones connected to my VG224. I have not configured any transcoders in my Call Manager. For IP phones I know we don't need any transcoders as this ...
Hi,Is this a bug.Always use prime line set to true is not working.CCM 4.2.3sr2b,IP Phone 7961 two line appearance.cmterm-7941_7961-sccp.8-3-3SR2.zipThanksMudassir
Running 12.4.11 cisco 2811 running mgcp. When wan fails, phones register to gateway, but the gateway does not failover unless it is rebooted. Anyone seen this? Symptoms are inability to make or take a call over the PSTN. Reboot the gateway with wan s...
Hi everyone,I'm trying to configure CM connected to a GK with H.323 clients registered with the GK.It should be fairly simple but I've only got communication in one direction: Calls from CM to the GK work perfectly. But calls from the GK-clients to...
Can I use a Compact Flash card to backup de config of a UC500 (or USB stick or whatever) And ofcourse restore it ? (on a other UC500)Thanx Andy
Please help with regard to location of hponcfg files on Unity server. The ILO management is working ok just need to find location for example to use for a non-working server.I have already used the hponcfg utility on Cisco CCM servers with location a...
Greetings everyone,How many wireless CP7920 can the UC500 route? I client of mine already has 6 CP7920 and 2 CP7941 Phone's he wants to buy a UC500W 8 users with BRI and a extra VIC for add. BRI ports. Is this going to be enough? Do I need anything m...
