Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,We are currently expecting problems with putting calls on hold and retrieve them later on. The problem is, that the call cannot be retrieved, the un-hold button is greyed out. This is only temporary. We are running IPCC version 7, this happens wit...
is the folliwing product included with CallManager 6.0 or is it bundled with the Callmanager:Cisco IP telephony Applications Backup Utility ??
Hi All,Does anybody know if it is possible to use fax relay and fax passthrough at the same time on a MGCP gateway?Thanks.
I would like to ask how to get the cdr raw data file from ccm.
Hi Guys, I have a question for you. Is there a gateway configuration to have the Caller ID show the name of my company when I make calls outbound? I have masked all outbound calls to show my main company extension, however I do not see the field t...
Is there a way to use a "ring-no-answer" condition in Attendant Console?? I have AC configured with a pilot point containing 6 users. When the call hits the first user and they don't answer, the call never hops to the next user in line (or available)...
Is there a way to search for unused exctentions/numbers in call manager 5.1
When I install CUCM6, I get "security configuration failed" and it goes to Database Access Security password page.I am quite sure that I put the right password and NIC car is connected to the network, I even can ping the server ip address after I res...
I have the following voice translation rule to strip a leading 9:voice translation-rule 1 rule 1 /^9/ //!!voice translation-profile strip translate called 1!It is applied to my dial-peer:dial-peer voice 800 voip description Outbound Toll Free to GC t...
Hi Guys,CCME 4.1!voice-port 0/1/0 description FXS!dial-peer voice 401 pots destination-pattern 7677 port 0/1/0!I want to monitor the number 7677 on the addon 7914. Is this possbile?Thank you!
Hi all, can anyone tell me how we change over the time for all phones on my lan, we have call manager express and cisco 7912 phones, do we need to change something on the phone end, or is it the call manager end ?
Hello, I'm having a problem with the the FXO's ports of my 1751 router. the thing is that when the user hangs(on hook) the phone, he has to wait for a while, so that he can call again.Any help would be good thanks
Hi all,i have a big problem with subj. My provider has configure two headnumbers on one multiflex. First headnumber is connected on channels 1-15, secondary on 17-31. The channel 16 must be used as signalisation channel. How can I configure this on...
I'm using a UC520 with CME 4.2.I have a sequential hunt group setup with five shared lines. I would like callers to be sent to voicemail if a ringing line is not picked up after 15 seconds. I have tried applying the Call Forward no-answer setting o...
Hi,is it possible to backup a DMA-Database from a CCM 4.2.3 running on MCS-7835I-3.0-IPC1 and use this Backup tar-file for a fresh installation of 6.0.1 on another platform, for example MCS-7825-H3-IPC1 or can I upgrade only on the samemodel.kind reg...
