Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Does 7940 support the 802.3af? I know that 7940 supports PoE. But what about 802.3af? Aren't they pratically the same?
We have a VIC-4Fxs/DID card inserted into a NM-HD-2V module in a 3725 routerThe first two ports on the card work find but ports 3 and 4 never go off-hook. When a call comes in i see the port ringing but when i pick up the phone i hear clicks and whe...
I'm fairly new to Cisco's Vo/IP and am trying to understand how "meet me" conference calls work. Does someone have a simple, basic setup guide for creating and using a meet me conference call. For example, If I currently have a meet me number creat...
Is there a defaul password for the 7936 conference station?
I have the following:2851MGCP CCM 4.2FXS card (4) port.(2) PRIs.DIDs come in on the PRIs, working fine.For the Fax DIDs, I have them coming in, then doing a translation pattern to a 3 digit. 16xx ---->6xxThe three digit number then goes a hunt pilot ...
I am trying to set up a GD box for a client and have never used one myself. The doc is vague on how to access it. What is the procedure? My user is trying to access it from his personal mailbox which is how I believe it is supposed to be done. Th...
I have a user who frequently travels between two offices. When he logs in to any IP phone of site 1 he should be assigned particular DN . When he logs in to any IP phone of site 2 he should be assigned another DN.can this be done without creating ...
When opening Attendant Console using a screen resolution of 1680 x 1050, the screens are blank. Lowering the resolution of my monitor fixes the problem. Is there a screen resolution limit?
We keep on getting power failures at our location. Which one should be powered on first?
We already tried to connect a matra PBX to a 2801 gateway (cm 4.1)with VIC2-2BRI-NT/TEand it's not working probably because PBX is using QSIG and BRI card basic-net3We consider to try with FXO - FXS cardI supposed we need both cards (FXO and FXS) in ...
Hello,I have CM 4.1.I would like to add to Corporate directory employees celllular.currently in the Corporate directory it display only the internal extension, how can I add cellular so each employees will have internal extensioon and also his cellul...
I have a CCM 5.1.1 cluster. I can login to Call Manager Administration, Operating System but not the Disaster recovery web page. I have used the same Administrator account and password for Platform administration to log into Disaster Recovery page. H...
Hi guys!I modified the Background for the 7970 devices and now I want to change it on all IP Phones. Does exist a possibility to change it automatically, via BAT for example without end-user manipulation?Thanks for your feedback.Alberto
All, I have an existing callmanager 4.X setup that the company is going to be "porting over" some phone numbers to. Im not sure how they are doing this, but I am responsible for making sure the callmanager handles these correctly. Im confused on th...
We're using CCM 4.1(3)sr3a which integrate with IPC MX Rel 12.0g using E1 qsig. But, we get the problem that sometimes inbound call is not work for IPC but outbound call is ok. But, it can be fixed when IPC reset the E1 card. Both IPC and CCM find no...
