I have 4500 SUP V module. I know it is used for 4510 and 4507, but can someone tell me if I can use it for 4506 chasis.Thanks
I have 4500 SUP V module. I know it is used for 4510 and 4507, but can someone tell me if I can use it for 4506 chasis.Thanks
HiI have several router in several branches. and have several isp line.IN My central head office i need monitor all the router link eastablish ok or not. I check by ping.But i want in cisco any software that all router gather one view of point and if...
Hi,it would be beneficial,if anybody suggest any tools to monitor the network with following requirements.We have our switches in the ring topology. Now we are monitoring thro. Whatzup kind of s/w for the identification of reachability failures. It ...
I work in Telecom Provider, and there are several VLAN 1.VLAN 1 : in witch connected servers2.VLAN 2 : in witch connected switchs..3.VLAN 4 : in witch connected end stations in witch VLAN i should put CiscoWorks LMS 2.2 server??
LMS 2.2 can manage devices and end station through an E1 connection??
I'm doing a fresh install of VMS 2.3 and I've gotten past the first disc on the install. Then the docs say to put in disc 2, and there should be 3 exe files on the CD. I only have setup.exe which is for the CSA MC 4.5. From what I've been reading,...
As we have to change from CAT-OS to IOS on our switches I´m searching for a way to alter duplex-mode and Port-Speed on Catalyst 4000/6500-Switches via SNMP. I have OIDs for read-only-access but i did not succeed in setting the values. Do you know the...
Following are my Router and Switch ConfigurationRouter A!interface Fastethernet0/0no ip addressduplex autospeed auto!interface Fastethernet0/0.1encapsulation dot1q 2ip address 192.168.121.249 255.255.255.248!interface Fastethernet0/0.2encapsulation d...
Hi,Please advice how should I go about doing it.I am trying to trap interface FCS error on cisco network devices on HP Openview. Based on this link, http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=ETHERLIKE-MIB#contents, -...
I am using LMS 2.5 / DFM 2.0 , with ~ 160 devices. My problem is that there are some events that remain active although they became obsolete. I tried to rediscover/delete devices, I reinitialized the whole DFM database, but these events continue to ...
When trying to run a NetConfig job in RME 3.5 get the following error message:Cannot Schedule Job. Exception Stack Trace: Java.Lang.NullPointerException.Any help appreciated,Mike.
I'm working for a new company and I'm running into a bit of an unknown for me.They have two 6513 that have been up and running for over a year. The previous network admin is no longer around and I'm a bit confused on some of the configurations on th...
Ive been experiencing bug ID CSCsb22036 and have seen the suggested fix will be added into campus manager 4.0.3 Well ive just installed this and am still having the problem.After installing the update, what needs to be done to reduce the duplicates? ...
Hi,I have used ifIndex in IF-MIB and portType in CISCO-STACK-MIB to get the type of port on a switch.But is there a oid that can differentiate between Ethernet, Fast and Gig interfaces.Thanks,Prakash.
With NAM 2, I am able to see real time conversion and bytes of all IPs, but how can I get the traffic in bytes within specific time? Under reports its only allowing conversion between two hosts, but I have huge network IPs inside...so is there any wa...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-11-2024 02:55 PM | ||
07-10-2024 01:26 AM | ||
06-25-2024 09:33 AM | ||
06-21-2024 11:13 AM | ||
06-09-2024 01:27 PM |
User | Count |
---|---|
3 | |
2 | |
2 | |
2 | |
2 |