Other Collaboration Subjects

I have gone through the few Cisco White papers regarding Hoot and Holler and its implementation and configuration. They state that hoot groups can be created dynamically on the fly, but don't seem to explain how this is done. I've read and understand...

I need to configured 3 IP Phones utilizing (Call Maanger) sort of Bat Phone Bridge. Option I:When any one of the 3 phones is picked up the other 2 phones ring and as they are picked up they get put into a conference bridge.Option II:Pick up any one ...

HiCan any one let me know how to clear voice messages in IP Phone,THanks in advanceNirmal

I'm using BAT 5.0.2 with CCM 4.0.2 and can't get a 1 line csv user and phone to insert. It validates fine but gives a message about lines and speed dials not matching the phone template.I've tried a 7940 and 7960 phone template with 0-2 lines and 0-1...

When configuring auto qos on the ports of a 3560 switch, my config ends up looking like this:interface FastEthernet0/1 switchport access vlan 8 switchport voice vlan 9 no ip address srr-queue bandwidth share 10 10 60 20 srr-queue bandwidth shape 10 ...

I have phone A at extension 100. 100 has CFNA to 101. 101 has CFNA to 102 and 102 has CFNA to 103. What is the best way to get the voicemail account of 103 to play if 103 does not pick up? I understand by default the original called number of 100 wil...

Anyone can tell me the current limit for the number of controlled device (CTI port and RP, phone, etc..) for single application provider (in other word for each Jtapi user) ?I know the total limit for single CM or cluster CM but the number I'm reques...

Hi ! I'm setting up a ATA 188 in a demo lab - Version C3.1.0. ATASCCP - Build 040305B.The device will not get a new config from the tftp server!!! I want to get SIP image on the device, but the upgrade fails both via TFTP or manual upgrade. I have co...

CCM 3.3.4 I have the log calls of zero duration flag set, but am not seeing reports and results related to this request. I need to have reports on calls made from CCM to external numbers that have not been answered. Any idea?

I am having trouble with Call Waiting on the VG248 with software revision 1.3 (CCM 4.1). Lines set up with call waiting (2calls/2busy) are able to retrieve a second call from internal phone numbers by using hookflash but a second call from an outsid...

Is it possible to configure the group pickup function for the 7902 ipphone model? How can this be configured?Thanks

Hi,I have inherited a couple of existing callmanagers from a new customer.They have version 3.3(4)SR2aIf i run ccmadmin from the publisher it works fine.If i run it from the subscriber i get the ie page open and at the top it says Callmanager 3.0!!!a...

ever since upgraded to 4.02 employees complaining that in the middle of the conversation, a operator comes on and say number cannot be completed as dial. happens when you pick someone up from being on hold or transfered.any suggestions would be grate...

ICS7750 with MRP which has a T1 card. It's been runnig for a long time. today we had the following issue: when receive inbound call from outside the quality is good,and internal call between ip phones are good, but call from ip phone to outside, the ...

Hi, I just want to know if we can connect an AS5300 with 2 E1 to a PSTN and that this AS5300 can be declared in Call manager 3.3 as h323 gateway or MGCP (because in the list of the gateway in the callmanager there is no AS5300) and if yes where can w...