Routing

I have a server that needs to be mirrored at my DR site and they are asking for it to have QOS on theIP address that goes over the wan link to the DR site. Is this possible?If not what would you suggest I use to to give the server traffic priority?Th...

hello,I am receiving an announcement, (ex. 1.2.3.4/24) from multiple peers, each of them sets an community on itmy bgp chooses an "best-path" and I can only see the community set by that peer (chosen as "best")is there an way I can configure bgp to c...

Dear all,I have Cisco 891/k9 router in my branch office, which is connected via a  L3 link from service provider. In the configuration of ipsec and gre. i found a problem when applying the crypto map in the tunnel interface, which seems like this.R1(...

I have a situation where a colleague left the company and did not document a new failover design for our remote offices.  The first connection is made through a standard BGP to MPLS connection (this hasn't changed). The second connection is a Site-to...

Hi,I have 3745 router with NM-2CE1T1-PRI  card and i am trying to connect RJ 45 from this card to DB9 on modem. Request someone to assist in pinouts to prepare the cable..

Edge R1 ===== ASA .1 --- 10.0.0.0 /24 .2 (Core R1) .2 ---Serial Link-- 10.253.253.0 /24 .1 (Router3) 10.2.1.0 /24                           .1                             |                        10.1.1.0 /24Here is my issue I can ping from 10.1.1.0 ...

Hi there, I'd just like a second opinion on some unexpected behaviour I am seeing in my test network. Please see the image below for an example topology.Routers are running (C3640-IK9S-M), Version 12.4(25d) inside GNS3 for test pruposes, although I a...

     Hi recently I started testing IPv6 internally using unique local address private space of FC00:abcd::/48. Everything has been working well accept I'm unable to get stateless autoconfig working for the unique global address with those ips, FC00:a...

I suspect I've missed something simple, but I've tried all day to make this work.  The provider said to use PVC 0/35 and PAP. The provider does not see a login attempt in the Radius logs.Here is my config:Building configuration...Current configuratio...

Hi,I have problems with router 2801, the version isCisco IOS Software, 2801 Software (C2801-ADVENTERPRISEK9-M), Version 12.4(24)T4, RELEASE SOFTWARE (fc2)When i start a download the processes of the router cpu stay in 99%/97%.When i'm not doing a dow...

Hi All,This should be real simple, but for some reason it does not work. My 6500 is only allowing me to enable one VLAN interface at a time.!interface Vlan2165 ip address 10.201.BB.30 255.255.255.224 shutdown!interface Vlan3038 ip address 10.201.BB.1...

Received two new 3945E routers with DS3 card.Need help to show how to configure encryption over WAN DS3 link.Thanks,