Routing

I'm a network mgmt guy that needs a sure way to find the bandwidth on frame relay interfaces. Often times, there is no bandwidth statement in the routers config and a show frame-relay map doesn't always show the bandwidth. This is a large network u...

Hi, we use a 2950 VLAN switch, one of the ports is connected to our DMZ (to a regional office) on our PIX firewall. Parts of the day the pix and switch is showing high bandwidth outbound to our other office, but we have no idea what IP or IP's are d...

This is what I want to achieve on a VLAN.. vlan 1 name "xxxx" untagged A1-A16,B1-B24,D2-D24,F4 ip address 10.10.84.1 255.255.252.0 ip address 10.10.85.1 255.255.252.0 ip addr...

I am setting up QoS on our 2621s and need to setup a class-map to match traffic from either an ethernet interface on the router or hopped traffic with a specific source address. I have created an access-list for the source address but have run into ...

Ladies/Gentlemen,I've recently acquired my CCNA and realize how much I still need to learn.Here's what I'd like some help with.I'd like to setup my 1700 series with my home DSL. I've already setup all the basics (DHCP IP on the 'WAN' WIC and static ...

Scenario, We have a number of static VPN’s (over 10) over GRE tunnels between Hong Kong (HKG) and Mainland China. (SITEA, SITEB, SITEC, etc…) Each remote office is using an 831 router with most offices having a single FTTP 3Mbps internet connection. ...

Hi allI'm in Australia and has subscribe to Telstra's BigPond Internet services via an ADSL link and would like to know where I can find a simple, basic ADSL config that I can use. My router is equipped with a firewall feature set which I'm thinking ...

Hello ! Can I implement IOS SLB on router (like 3660,28xx,38xx) ?

Hi,I recently started as the Sys Admin for a company.we have a Cisco Pix515 and a Cisco 2611XM router.One of my tasks is to learn each of them, document our environment and make it user friendly for others to use if I were to be out of the office.Can...

We have some issues with people accessing https traffic over internet from east coast to west coast.The response time for them is really bad and sometime the images do not load properly or text is missing and it takes a very long time to load.The int...

Hi,I have a question that I'm having some trouble solving. I haven't been able to find anything even remotely close on Google or Cisco's tech support site that suits my requirements.I have two separate ISP connections. Each ISP connection routes me a...

We are implementing Metropolitan Over Ethernet as a WAN solution at one of our facilities. The Telco hands us an etherent connection that comes from a FastEthernet and goes to a FastEthernet0/0 on our 2651 running 12.3 software. We are only buying ...

Can anyone help me out with this strange case. I have very simple scenario with one hub router 2621XM and a couple of spokes 2610 XM and 1600. They are connected over p-t-p serial interfaces over frame relay. Let's take one p-t-p interface as example...

Hi all,I have been tasked with installing a small WAN through 3 sites all connected via wireless bridging. Each site has an 831 router and a 2950 switch. Anyway I was wondering how I can go about structuring the IP addressing, can I set up the 831 ...

I am trying to reset a lost password on an old 2509 router. I have entered the break key sequence at boot and the router load sequence stops with a '>' prompt not a 'rommon>' prompt. It does not accept the command 'confreg 0x2142'. Entering a '?' com...