Buy or Renew
Buy or Renew

Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Start a conversation

Resolved! Cisco 2611XM syslog errors

Hello, I am getting these types of errors on a 2611XM router. Anyone got a clue?dis-xak#sh logSyslog logging: enabled (0 messages dropped, 2 messages rate-limited,                0 flushes, 0 overruns, xml disabled, filtering disabled)    Console log...

Resolved! enabling spanning tree

Hi,kindly explain eaning of below -when i assign a port to a vlan and enable spanning tree portfast feature, i get following message -sw#spanning-tree portfast%Warning: portfast should only be enabled on ports connected to a single host. Connecting h...

Resolved! Trunk Port setting on Ethernet switch

Dear Expert,On 25/F, the IP segment and VLAN assignment are as following: detail please reference attached file and diagramR2FE0/2: 192.168.60.0/24FE0/1: 192.168.50.0/24FE0/0: 192.168.254.0/30R1FE0/0: 192.168.254.0/30FE0/1.11: 192.168.11.0/24FE0/1.12...

Need help on netflow on 6500 switch

Hi AllI am currently configuring a 6500 to send data to a stealthwatch xe Netflow device.I though i has this correctly configured using the following config -ip flow-export source Loopback0ip flow-export version 5ip flow-export destination (ip add) 9...

Resolved! dhcp server

hi,i have a query regarding dhcp..say we have a vlan 1 ip range 172.22.1.0 255.255.255.128and vlan 2 172.22.1.128 255.255.255.128ip dhcp pool VLAN_1  network 172.22.1.0 255.255.255.128  default-router 172.22.1.1   dns-server 172.22.2.8   domain-name ...

3560 sw question

hi! we've a few 3560 sw that run on flat network. Here's the config on one of the switch. Can i create another vlan eg. vlan10 in this switch as a backup vlan? I do not wish to add more vlans except the backup vlan10 and vlan10 do not need to be rout...

dave dave by • Level 1
  • 453 Views
  • 5 replies
  • 0 Helpful votes

Need help on Lab setup

Hi All, I have a lab setup with 5 VLANs defined in my layer 2 switches (PC6248 and PC8024f) as per the diagram attached. These are actually Dell powerconnects, but would be replaced with Cisco gear very soon.These Layer 2 switches are connected in a ...

VLANS across a WAN-Newbie

All,in a situation where there are 2 2811 routers connected by a point to point I need to configure a Voice and Data VLAN on some adtran switches.  Can someonepoint me in the right direction for what I need to do on each router to pass the VLAN traff...

Resolved! duplicate address on switch

hello,we saw following messages on pair of our core switches.%STANDBY-3-DUPADDR: Duplicate address 192.168.2.5 on Vlan17, sourced by 0000.0c07.ac02 %STANDBY-6-STATECHANGE: Vlan10 Group 5 state Standby -> Active %STANDBY-6-STATECHANGE: Vlan10 Group 5...

suthomas1 by • Level 6
  • 4326 Views
  • 4 replies
  • 0 Helpful votes

Resolved! Traffic Filter on Span Port

Hi, I need to put a filter on a Span Port (on Cisco 7600) in order to reduce the traffic (the traffic is taked from a MPLS link with a TAP) before inyect it to a sniffer server. I tried with VACL , ACL but the filter doesnt works.I 'll appreciate you...

View All
Review Cisco Networking for a $25 gift card