Hi i`m using ise ver 3.4 with native supplicant i was trying to apply low imacpt mode , the problem is when i apply the ACL the user cant take ip or anything that i allow in ACL , but when i writh this CMD (authentication open)under the interface hi ...
Hi We have ordered some 9200Cx, but it seems that we need a micro USB to get to the console. Not the standard mini USB type B, but the mobile phone type USB Micro Type B.A standard USB Micro Type B, doesn't work, even with the Cisco USB Driver, not s...
Hello office working well, i cant entry ssh via private address, when i try connect via global address i coudn't i will start trublishooting everythisg is good, i Guess ISP will block ssh incomming or any filter to my private ip address, Thanks in ad...
Hello i am using a cbs350 core switch and 2 cbs220 switches for other devices like workstations. The cbs 220's are producing a lot of Dynamic MAC address table full (32768 entries) messages while the mac address-table is nearly empty.CBS220-48T-R211#...
I have X2-10GB-SR 10Gb modules plug into Cisco WS-C3750-E layer 3 switch and Mellanox ConnectX-3 10 GbE adapter installed in ESXi 6.7 server (Dell PE R710). Both ends connected with LC-SC fiber optic cable. ESXi server can detect Mellanox ConnectX-3 ...
Hello everyone,I configured GRE over IPSec in transport mode, and wanted to confirm the configuration. I was wondering, why do I see two ISAKMP SAs on each router? Shouldn't the ISAKMP SA be bidirectional? It seems like I have here two unidirectiona...
I am using Cisco 9300 48UXM-E, after configuring when I reload the switch I am losing configuration. Switch is coming as new and when we use command copy start run config is coming back. On my research I understood that config-register is not changin...
Hi,Im trying to configure a PBR betwen 2 EPGs but camed across with an issue.The PBR is working fine from consumed to provided.The issue is, it still works from provided to consumed. Even with "Reverse Filter Ports" disable.Is this behavior correct...
Hi All I recently discovered that the WLC 17.9.1 offers in the Policy Profile an option to enable/disable IP MAC Binding, which is required for example when using VMware Workstation with a bridged Guest, so that both, the host and guest can get an IP...
I have an Issue with DNAC and Spaces. I get the following errors when viewing Maps: Unable to Identify Connector & Unable to export hierarchy to the CMX/DNA Spaces for one or more domains. An internal failure occurred while pushing an archive to th...
Dears,This is regarding a PCCE environment, version 12.6(2).We have the Outbound Dialer successfully configured and working properly.We are currently working on a report to display the outound dialer call details, including Agent Name, Extension, Cal...
Hi Experts. Hardware: ASR9010 Software: 5.3.4 Customer want to configure Segment Routing MPLS and MPLS L3 VPN, we have Typhoon cards (MOD80 and MOD160). I would like to know whether MOD80 and MOD160 support SR MPLS and MPLS VPN function and whether n...
