Activity in Technology and Support
Resolved! Options for certifcates for REST server
I have a UCCX script which places REST calls to an HTTPS server. The certificate on the HTTPS server changes frequently. I am wondering what my options are, other than manually uploading the new Tomcat-Trust certificate each time it changes. 1) Is it...
ASR Pseudowire to remote physical interface vs loopback?
Hi We currently run a number or pseudo wires over our MPLS network with the targets for the pwire being the loopback of the remote router. This means that our pwires re-route in the event of a primary link failure as long as there is an alternative p...
BGP VPNV4 PEs not receiving routes from RR
I have two PEs connected with one CE each, both of the PEs are connecting to one RR1. RR is recieving the routes from PEs and it is sending them as well but for some reason PEs are not installing the routes.RR1router bgp 65000bgp cluster-id 100bgp lo...
ISE Secondary node sync up failed on 3.4 after automatic PAN failover
We have a 3 node deployment ISE1-PAN (Admin, MNT, PSN), ISE2-SPAN (Admin, MNT, PSN) and ISE3-HEALTH (Health node)To test the failover we shut the network ports on the ISE1-PAN, after the configured polling intervals the ISE3-HEALTH triggered the f...
Resolved! NSO Developer Studio Explorer and VSCode version
Colleagues,Could you please share any tricks to make latest VSCode version (like 1.105.1) work with NSO Explorer (version 1.1.1). Latest working VSCode version ~1.96. With all version after - VSCode isn't able to connect to NSO. Believe MS changed s...
Legacy Boot to UEFI Boot
I could use some guidance. I have not tried support yet from either Cisco or VMware but here is my struggle. I have an environment with probably 15 - 20 b200m5 blades. They are all set to legacy bootThey all boot local via local disks configured in a...
Call-Home transport method.
I have a bunch of C9200 and C9300 switches. Call-Home profile is configured with "destination transport-method http". A Google search seems to indicate I should be able to change that to "destination transport-method https" but when I try to I get a ...
9300 stack needs to be broken out but keep the configs
Hello,Currently I have a stacked 9300 with 2 members (master & slave)I want to remove the slave from the stack to make it, its own standalone switch BUT I want to keep its current configurationWhat would the steps be for this to happen?In my head the...
Dual-ISP Setup for Gaming Traffic Optimization
I am testing a dual-ISP setup at home to see how routing impacts online gaming performance. The goal is to:Use ISP1 for general traffic (browsing, downloads, streaming).Route gaming traffic (PUBG, Free Fire, COD Mobile, etc.) through ISP2 for lower l...
Automatically Set Port Descriptions
In preparing for CiscoLive! in San Diego, I am provisioning our access layer 3560-E switches. Since things have a tendency to change a lot at an event like CiscoLive! I thought it would be best to make sure our port descriptions are always up-to-dat...
Router is not using default gatway for ICMP Ping - strange behavior
I am simulating a simple network technology with IOU L3 images and observe a strange behavior with image version 17.15.1The network consists of 4 routers, One of them is named a "SourcePC" (bottom of diagram) - a router from which I do an ICMP ping (...
Resolved! Hospital network conditions for testing purpose
Hello Everyone,I want to test my medical device which connects to the cloud sever through LAN and currently through our office lab network. I want to perform test by simulating the hospital network for various Downlink/Uplink speeds, latency, jitter ...
Copy SG300 software img between 2 same switches
I have 2 SG300 10P switches in my network and have different software S1: 1.1.2.0 and S2: 1.4.8.6.I look @Cisco Support to Upgrade S1. But because the SG300 is ELO support I cannot download the Software any more and want to use the img on S2.However ...
Nexsus dashboard version 3.2.2m over 90%
I have nexsusdashboard cluster 3 nodes ver 3.2.1 on esxi after i upgrade to 3.2.2m the ndfc can not load the app and i get error on the cluster that the logs are 100% and i see that /logs/k8_infra/ and confd are 100% so it doesnt go up how i delete t...
Resolved! Required image not found on AP downloading image from controller Loop!
I am trying to connect a replacement Cisco Air-Cap-1552E that I am trying to connect to our WLC5508. . It says required image not found on AP, downloading image from controller. It looks like the device is stuck in a downloading software and reboot...
| User | Helpful Count |
|---|---|
| 72 | |
| 60 | |
| 51 | |
| 48 | |
| 40 |
