hi, I am in the process of testing BGP EVPN. requirement is to allow multicast between vrf. for this reason third party firewall loopback interface is configured as multicast RP and SPINE is configured with border role to provide L3 external connecti...
Not a question, but a heads up in case anyone else runs into this and tries to google for it. I upgraded three CUCM nodes from 12.5 SU9 to 15 SU2 via direct upgrade. Publisher and Sub1 had to be rebuilt to a medium OVA to fit the requirement for th...
I am looking to upgrade our wireless controller from version 17.9.6 to 17.9.7. I selected the option to do the AP Image Predownload, and the predownload failed on 13/45 of our APs. Does this mean that if I were to download and install or save and act...
HiWe have 2 SDA fabrics. Site A and site B. Site A provides internet access for both sites at the moment. We want to introduce a second internet pipe and site B solely for that site. However, we want site A to provide fallback internet access sho...
Hello, This is regarding a PCCE environment version 12.6(2). We are developing the below custom report for the Agent Call Details from Termination_Call_Detail: select DateTime,ANI as CallerNumber, CONCAT(P.FirstName, ' ', P.LastName) AS AgentName, c....
Hello i am using a cbs350 core switch and 2 cbs220 switches for other devices like workstations. The cbs 220's are producing a lot of Dynamic MAC address table full (32768 entries) messages while the mac address-table is nearly empty.CBS220-48T-R211#...
Hi,I have two switches that are configured for region A, and now I need to connect them to some switches that are in region B. there is concern around spanning tree loops and I want to make sure my configuration is right.so my understanding is that a...
Hi all,One of the two ISR4431 started to boot into errors after power outage. I can enter ROMMON, able to boot many different IOSes (including external TFTP download via Gi0 interface), but all of them got stuck & reboot with the messages below (more...
Hello, I'm going to upgrade my FMC from 7.0.7 to 7.4.2 directly without upgrading my FTD (7.0.7), I'm using Flexconfig configuration used for PBR. I read that starting from FMC 7.1 flexconfig configuration will be removed from FMC and it needs to be ...
Good afternoon everyone,We have recently deployed a Cisco Room Bar Pro with a Ceiling Microphone Pro. The Room Bar Pro is configured for Teams Room, but the WebEx Admin Center is indicating that the setup wizard for the Ceiling Microphone Pro has not...
Ironically never implemented nor really went in depth with them, but say I have a dmz, amd I want to carry that network to my virtual cluster using one cable on multiple hosts.Is it just an isolated config? All I need is the vlan tag right? Also if i...
Hey everyone,I'm running into an issue while provisioning Cisco FTD on Nutanix using the V2 API. When I deploy the VM without a Day 0 configuration file, the default password works fine. However, when I attempt to set a custom password using vm_custo...
Hello We previously used ASAv firewall provisioning/cloning for the Nutanix platform via the Nutanix REST API. Now, we are planning to provision and deploy Cisco Firepower Threat Defense (FTD) on Nutanix using an API-based approach, and later manage ...
