Activity in Technology and Support
Student trying to use CISCO Sandbox
I’m a student trying to use the Cisco Sandbox to get some hands-on experience with Cisco SD-WAN as part of my CCNP exam prep. I got an email saying I need a VPN, but when I try to download Cisco AnyConnect, it mentions something about needing a contr...
Config t versus TFTP (Cisco 819 and 829)
I'm a new user of Cisco products in a public transportation agency and I'm working with both the Cisco 819 and 829 routers. These devices are installed on a large fleet of vehicles.We have written procedures for setting up both models, but the engine...
Trying to set Cisco AP 9176 Current Power Mode to Standard Power (SP)
I'm trying to test an AP on standard mode (SP), but AP it stays on (LPI) mode.I have confirm that it is showing AFC information (status active) and it does have 802.3bt power.RF profile has Standard Power service enabled and applied to AP.Is there do...
CUCM and Unity Network Requirements for Remote Backup/Restore
We’re planning to backup and restore CUCM and Unity Connection across multiple international VoIP sites to/from the cloud.Could you help me know what is the recommended network latency (TTL) as per best practice to ensure a reliable and successful ba...
cisco Nexus9000 C92160YC-X qos question
HiI have a couple of cisco Nexus9000 C92160YC-X as core switches. I have 6 pairs of catalyst 9300 switches connected via VPC to these cores. I was configuring auto qos voip trust on these access switches but I came across an issue on the core switche...
Do different Cisco ASAs handle IPSec tunnels differently?
I have on my network two different models of Cisco ASA which seem to operate differently from each other. Can anyone confirm that this is the case?Device type A is a Cisco Firepower 4120 running ASA version 9.18.(4)34 in Multi-Context mode.When conf...
ISSUE 12511 Unexpectedly received TLS alert message reject client
I am having an issue with TLS on Windows 10 Pro. When I log in to the SSID using my Active Directory username and password, it works, but then I get an error saying “Can't connect to this network.” How can I fix this?
Multi Phase 2 connections with IPSec Site 2 Site
ive got a problem i cant seem to figure out. When my Ipsec tunnel is built it makes a new phase 2 connection every 60 seconds. 1.1.1.1 = Cisco Router2.2.2.2 PfSense Router----- Connection configuration -----1.1.1.1 => Internet <= 2.2.2.2-------------...
Resolved! err-disable state SW down interface
HelloHello I am attemping to install two cisco 9200 Series . The por 24 is in trunk mode is conecting against other 9200 series ( i dont have acces now to this SW this SW has a some SWitches on different port the SWitches are no cisco) .there is not...
Trouble adding new user to FMC
I added a new user to FMC, but when running the test, it's saying the user doesn't exist:user :adminattrib :sAMAccountNameldap_result: 32 -No such objectThe user does exist in my domain, so not sure what else to try.
Future of Your WAN - What’s New in the Cisco Catalyst SD-WAN
Cisco Catalyst SD-WAN builds a secure, unified connectivity over any transport and provides simplified operations with centralized management, policy control, and application visibility across the enterprise network. In this session, you will explore...
Introduction to Cisco Intersight Automation API and Ansible
This webinar will include the provide you the following: Comprehensive Learning: Gain insights into Intersight’s foundational features, advanced integrations, and automation possibilities.Interactive Sessions: Experience live demonstrations of key ca...
ISE Profiling Conflict
Hi all,I’m relatively new to Cisco ISE, and I’m running into a profiling challenge I could use some help with.We have an existing deployment of Device A that authenticates via MAB and is correctly profiled using a custom policy. I’ve now been tasked ...
Advanced BRUM Script Building
Join us for our first session of the three Synthetics sessions, where a Cisco Observability Engineer walks you through building your first synthetic scripts, for both BRUM and API. Feel free to simply watch or take the opportunity to get hands-on exp...
Enhance Your Network Security with Cisco Secure Firewall
Watch this webinar for an engaging event exploring the latest innovations in Cisco's cutting-edge firewall solutions. Learn how we are redefining security with advanced features designed to address todays' critical challenges, including encrypted tra...
| User | Helpful Count |
|---|---|
| 93 | |
| 87 | |
| 81 | |
| 72 | |
| 69 |
