TelePresence and Video Infrastructure

At present I have polycom gsx 6000 VCU and they break out via ISDN. I am now being asked to set up videoconference over the internet. This is where the issues begin I think. The firewall I maintain does not have a direct link to the internet. I NAT m...

I work for a state/local government municipality. We have a main line where all the public can call. We would like to set the phone up so only one call can be taken at a time and all other calls can be sent to a directory listing by department. How c...

Hi,I have a few remote offices which use a Cisco 877 ADSL router for their VPN connection to our HQ where they connect to our Cisco 5520.We are going to introduce VOIP which is fine for our LAN and WAN as it's on an MPLS with QoS, but how can I add Q...

I am wondering about how to get the SIP firmware for the 7940g/7960g phones. I have been told many things by different people and need some clarification from Cisco directly. I was told first that it could be downloaded from the cisco website but wh...

Hello all,I have a campus network with several remote sites, at the campus I have a 6509 at the core and 3560 and 3750 switches at the access layer. I do have QoS enable on the 6509 and I am using auto QoS on the 3560 and 3750 switches and all seems ...

Hi all,I have 4 DMP 4305G, DMM and VP appliance as well, Version 5.0.The problem I have is how to configure a DMP to play a mpeg-File stored localy on the internal SD-card.To play with a playlist or a presentation is no problem1Thanks

Hi,I have configured a sip trunk in Call Manager 4.2 which points to proxy server of service provider. I have two problems.1) how to use that trunk for outbound calls since i do not find any thing in route patterns page to forward calls to that trunk...

Hi People,On the Gw version 5.5.0.0.5, when a endpoint or a Cisco MCU MC06 call an ISDN number, the endpoint or the MCU get on the display (in replacement of the isdn number) the information " vxTarget". How can we configure it to keep the isdn numbe...

Symptoms>Pick phone up with a dial tone>cracklingDials number >cracklingRinging > cracklingOther ends picks phone up, normal no crackling and speech normal.?----------------CCM Version 4.2(3)sr3aPhone 79401 line-----------------Switch details>Cisco I...

I am having issues with my modems running intermittant Sync loss and bit errors (5-20 minutes depending on speed). If I hook the modems up on a traditional TDM E&M line I do not see these errors. I have set up a lab environment with my 2 ISR's direc...

Hi,Am currently running DMS 5.0.5.0.2 has been released October 2008I've looked in all the usual places on CCO but I cannot find any information on what issues this upgrade addresses.Can someone please point me in the direction of the release notes f...

Have a PRI and point to point T1 terminated to a VWIC2-2MFT-T1 card, when the pri has priority clocking, there are no slips except on the point to point T1 and vice versa. Does anybody know a way around this, both clocks are set to internal. I have...

Have a new implementation of DMM and VP.I have created a new program and play list and the rest and am trying to deploy it to the VP server.1) What are the default username and passwords to either ftp or sftp content to the server?2) How do I create ...

have several customers wanting a video solution to mesh into a Cisco UC environment with MP/MPE but want ease of use.Customers cannot afford the Telepresence product and want to integrate the polycom such that the audio is done via ip phone and video...