Hello;
I meet an issue that some endpoints (SX20、SX80) drop the call from MCU. and the log is H.245 network connection error.
now the condition is all endpoints and MCU register in VCSC. all call by H.323
MCU version 4515.
can someone h...
UPDATE 03/02/2017 01:49 PM Central: Time between dialing is 60 seconds not the 1 second I posted. Patrick Sparkman very eloquently corrected me in his post.
We have an issue were Conductor will call a Participant twice in the same conference. The fir...
Hello everyone,
is possible for someone to clarify for me how CMS is using the GUID when a call comes to a cospace? From Scalable and Resilient Guide of CMS 2.3 it says the following on section 1.3.6:
new ownerId and ownerJid fields per /coSpace...
Hi there,
I would like to use the VESA Mount Adapter on my DX80 unit, but I have no screws to take off the existing stand as per
the instructions here:- http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx80/install/dx80-vesa-mount-installat...
Is it possible to adjust the standby timer of the Webex Board? I found the setting for the DX80s but that option is not in the same location for the Webex Board.
What is the default time length for standby for the Webex Board?
Thank you for an...
I'm currently in the process of setting up my Expressway-C and Expressway-E (version 8.10.4) to replace my VCS's. The Expressway-C/E have been installed on VM's and will be connected to a new installation of the Cisco Meeting Server CMS (2.1.) The ...
Hi Dears.
I have a question regarding CMS.
So i've deployed CMS for Demo. I have 2 codecs registered with CUCM and CMA with CMS.
I have configured External Directory Search Locations for CMA to be able to search for codecs to call them from CMA. ...
Hi All,
I have cms v2.2.9, with this version, I can do screen sharing in a meeting, but I am not able to remote control.
after V2.2, cisco release many new versions, I want to know if there is anyversion support remote control?
appreciate if you c...
I am trying to prepare an inventory of video infrastructure and managed to get all the information extracted from TMS except the touch 10's
Is there a easy way of getting information on touch 10's connected to each video codec
Hello Support,I've seen many examples of the DNS SRV records and have read the VCS Cluster Creation Deployment Guide for X8.1 example. I was hoping I could a second set of eyes to verify that my DNS configuration below is accurate. Here is what I ha...
Hello, is there any way to get TMS to allow endpoints to dial into a bridge prior to the meeting start time when setting the connection method to "One Button to Push"? this was allowed in CTS Manager and is what our endusers are used to. we recentl...
From what I have known from the community I have come to understand that for standalone deployment, H.323 is the only recommended way and that if I want to use SIP I would need a Session Border Controller, i.e- TMS/CUCM/VCS.
1. Is there any way tha...
Just wondering if the Spark Room 70 supports an additional Precision 60?
I know that Presentertrack isn't available (at least not yet) for the newer series of endpoints and that you can use a Precision 60 on a Spark Room Kit Plus, just unsure if th...
