I am using Unity Connection version 7.1.3 and would like to configure a shared voice mail box so that only one user can access the messages at a time. Users trying to access the voice mail box following the 1st person will not be able to get into the...
Forum Posts
Hi guys ask about how many SIP session support by Cisco ISR4321-V/K9 , Imy plan to buy CUBE with SIP session, i go thru internet i found this router , i learn that " V" indecate to voice license but no one mention how many SIP sessions support?
HiI have CUCM and IMP 12.5I mus configure manually the IP address of IMP server on jabber in other to connect What should I do to no need to configure this adress manually on jabber and connect successfuly ? Please help
Resolved! CUCM No voice on internal call
HiI have CUCM 12 and ip phone 7821CUCM and IP phone are connected on the same switch on VLAN voice 10Phone ring and call are establiched, but there is no sound, and no voice Please help
Hi Pals,Wanted to ask you, this questions. We have appusers that control the phones CTI using UCCE, in those app users we have the roll arrigned "Standard CTI Allow Control of All Devices", My questions would be if I have the role "Standard CTI Allow...
Hi everyone I have a CUCM with PSTN/GSM connection.I want to allow one extension to call only 2 specific numbers only.This extension must call those numbers in case there is an problem at the office only.How can I achieve it, an idea?Regards
Hello, I have a cucm 12.5 with Huawei AP AP6050DN the issue is not registering to the CUCM. Any special config to check? thanks.
HiI have CUCM 12 and ip phone 7821CUCM, IP phone and ISR Router with Vlan sub interface are connected on the same 9200 poe switchCUCM IP adress 192.168.10.2/24CUCM gateway 192.168.10.254DHCP pool in CUCM 192.168.10.100 to 192.168.10.200 VLAN 12 is d...
Hello, I am working with Unity Connection 10.5. Everything seems to be working, but one annoying little thing --- When a user decides not to record a custom greeting, the system does not announce their phone number or user name to the caller leaving...
Resolved! Voicemail Pilot Recording
Hello,Can anyone direct me where to upgrade the recording that plays when I call the voicemail pilot?Thanks!
Resolved! CUCM TIME CHANGE
Hello All, I need to update the time of CUCM. We have a time mismatch with the recording server and advised to update the time of CUCM. I can see in OS administration that NTP is currently enabled. And I am getting a message Time cannot be set becaus...
I need to update the time of CUCM. We have a time mismatch with the recording server and advised to update the time of CUCM. I can see in OS administration that NTP is currently enabled. And I am getting a message Time cannot be set because NTP is en...
I am doing a very very simple user query on a customers Callmanager to generate a report. Its basically this: from zeep import * from requests import auth from requests import * from urllib3 import disable_warnings disable_warnings() session = Sessio...
I've been asked to export the after hours greeting, but it was created on the undeliverable messages mailbox mailbox account. I need to export it, but the option to do so it greyed out. I've tried to google a solution but I guess it's not a common is...
