I have cisco call manger 12.5 and cisco ISR 4451 with CUBE-Version : 11.5.2, I have sip trunk to my CUBE, when my client makes an Outbound call to CUBE every things is fine but when other call party disconnect the call, my client side call does not ...
Forum Posts
How can Cisco Prime Provisioning be used to change endpoints from one user to another? Or handle the case when the user has a name change. Provisioning seems to be able to add services pretty well but I cannot figure out how to create orders to cha...
Resolved! Effect on licenses post CUCM upgrade
Hi AllWe are planning for CUCM upgrade from 9.1.2 to 11.5. But I have some doubt regarding the licensing part. In the current version we have ELM for license management, which indeed is going to change to PLM in 11.5. Will there be any impact on the ...
Hello ,i found port requirements on doc. like as below;is that ports should be open bi or unidirectional ? FromToPortPort DescriptionCisco Unified Communications Manager / IM and Presence ServiceCisco cloud443/TCPHTTPS-based communications:· S...
Dear community, I was reading documentation on how implementing SSO for Jabber in CSR 12 and above and I have some questionsIs it possible to enable only SAML and not OAuth2 in an on prem scenario to enable SSO for jabber?Then what would be the benef...
Good day guys,Can anyone give me a hint or point in right direction?I need to get CDR for interconnected Lync server, but there is no records to show :( Telephony system consists from CUCM 8.6 cluster and Lync servers. CUCM cluster is connected to te...
Hi, I have a rather old, but yet working fine VOIP gateway, i.e. Cisco ATA 186. I've tried upgrading its firmware, but I couldn't find any firmware files on Cisco Support pages. Can anyone share files containing version 3.2.4 (SIP) for that device or...
Hi everyone,A customer asked me to block calling in Jabber without dialing a 9 to make it similar to their physical phones.I have deleted the Application Dial rules and it is working but the customer wants the exact same experience as dialing from th...
Hello Guys, Actually i do not have a lot of information about standalone PLM so i have some questions , please clarify 1-) İf i have 3 CUCM Clusters and they already have co-resident PLM and i want to use standalone PLM for these cluster.i gues i nee...
Is there documentation for how to do this? We need the voicemails which are for our Covid response line.
Resolved! CUCM v12.5 Insufficient Licenses
Currently on a Collaboration Flex EA Plan for 450 users (540 w/ 20% growth included) for on-prem calling (CUCM v12.5.) Our Enhanced Plus licenses are showing as insifficient however it appears there are still more licenses they can be borrowing from ...
I'm trying to find the option to adjust the Ring Schedule as described in the Self Care portal documentation "Set Up Ring Schedule for Single Number Reach". I've enabled and added Additional Phones but with edit the "Create a schedule for this assign...
Hi Guys. We are comparing Cisco with other solutions from a On Premises perspective as potential solution in near future. We have some queries and done some research on the subject. We will be most grateful if one of the collaboration experts can exp...
Hello, unfortunately, I get an error message if Im activating the VisualVoicemail service on IP Phone 8845. Following steps I have done: - Phone service configuration: • Service Name—VisualVoiceMail.• ASCII Service Name—VisualVoiceMail.• Service URL—...
Cisco call manager >>>> Cisco 3750 switch >>>> Juniper Firewall <<<<>>>> End user on Pulse secure VPN. All users are unable to hear any audio when they are connected to pulse secure vpn and access their Jabber present on their respective PC's. Call i...
