Unified Communications Infrastructure

We've setup a new Unity 4.0 installation with Exchange. We have the Active Directory and Unity running at the same machine and it's thedomain controller.We would like integrate the Unity in an existing domain, is this possible without install the uni...

Hi,I am currently working in a mixed NT4 and win2k environment, all of whom have Unity accounts. There is no problem at all with the users who are logged into machines belonging to the AD domain, however when we are using NT4 workstations (not in the...

I'm having a problem running the Configuration Setup on a Unity 3.16 server I'm trying to migrate to new hardware. The Configuration setup runs up to the last dialog prompt where it wants the Unity Admin account selected. The values for this prompt ...

CM Pilot Point 3000CM Voicemail Pilot 1001When a caller dials 3000, pilot point is directed to hunt group (Call Attendant User line 1 – 12) with the last member being direct call to 1001.After hours when Call Attendant is turned off, a call to 3000 i...

Scenario: unity 403 with SR1. Offbox 2000 exchange serverUser hit the messages button on the phone…and enter voicemail password when prompted then receive the following message:"Sorry this system is temporarily unable to complete your call. Please ...

While trying to get Unity Express 1.0 working I have managed to get into a situation where I try to log in as anybody through the GUI and it gives me the error 'ip connectivity problem with host router'.I was able to log in previously as the admin us...

UNity 315, offbox exchange 55, NT 4.0. Unity has raid 1 disk(2 mirrored disks). If I remove one disk(say B) and do an unity uninstall on the remainging drive, say A.Then remove the A and put pack the B. Will the unity still ok? I am wondering if I un...

How do I verify it's UM license or VM license? If happend install a server as UM but licensed as VM, is there any technical issue? Say exchange 2K. Thanks

Hi, I am treading into new territory on this and I have a couple questions. I am doing a rollout of CCM 3.3(4) with Unity 4.0(3). As part of the install I am going to have to do an integration with an Avaya S8300 Media gateway for one of our office...

Can a single Unity system connected to a single G3 provide messaging\MWI support for G3's networked via DCS\QSIG. Has this been done before?I know this is possible with a single Octel/Intuity system, I assume the implications are similar.

Hi.I would like to know the best way in order to integrate a Unity System with a Meridian Option 61C system. The Unity will replace an Octel VM system.I'm a bit confused with all the different cards and options and I would like to see if you guys hav...

Unity 4.03 Exchange 2K and bellhop.Experiencing two problems:1st. issue:The first voice mail for a new guest will not show up in the mailbox. Second and subsequent messages work fine.The error that I see in the aplication log is the follwoing:Cisco U...

Unity 4.0.4 UM-Mode w/failover with off box Exchange 2003 integrated with Fujitsu 9600.I am getting a start up error stating that 'Avaudio service did not load' This causes TraP not to work, and also makes the system think that 'No ports are install...

Hello,Quite often, my users complain of long delays when they call into Unity to retrieve their voicemail. It normally occurs when they call in from the PSTN. So far, I do not know of any occurences of it within the AVVID network itself.Is this som...

Is there any way of recovering a unity server with just a SQL backup and System state backup. I have a backup of the system state and MSSQL databases using Arcserve . The DIRT utilty looks like it stopped backing up without warning at the beggining o...