I need to open a TAC case involving a CUCM v10 server running as a VM. Where do I find the serial number???Thanks, Mike
I need to open a TAC case involving a CUCM v10 server running as a VM. Where do I find the serial number???Thanks, Mike
Hello, I have a call manager version 15.4(3)M3 /CME 10.5 setup on 3900 series router. I would like to upgrade the IP phones to 8841 or 8851. Are the two phones compatible with the CME version
Hi, Currently we are running with CUCM 11.X version and jabber is used only for calling purpose,which means jabber is in phone only mode.I would like to understand if we shutdown the VM's of existing IM&P server is there any impact.If 'yes' what will...
Hi Guys i have CUCMv7.1 .... and i have a problem i can`t access to it each time i write his ip add i can see first page at CUCM and then when i click on CUCM Administrator i found this message so, what is the problem, and how i can fix it
Hello, I have two Unity servers, one at each site that recently started displaying the message "Communication is not functioning correctly between the servers in the Cisco Unity Connection cluster." Users recently began reporting MWI issues at the ...
Good morning, We are using cisco jabber and some users are having issues with names wrongly displayed. They only have their phone numbers dislaying.Is there any workaround to solve this, avoiding to re generate a windows profile , Thanks a lot
Hi, I just read release note for Collaboration Endpoint 9.x and learned how to push custom configuration on a new registered endpoint using customization provisioning field. There are several types of devices like SX10 to Roomkit Mini, and I would li...
Hi, good afternoon.We had a some disconnect calls incoming from PSTN with cause code 16, the calls dropped when going off-hook. The current version of CUCM is 7.1.5.33900-10, gateway H323 with E1 R2-digital. We tried a check/unchecked MTP of gateway,...
Hello!We have CUCM connected to VCS through SIP trunk, and VCS connected to ISDN GW MSE8321 through H323. 8321 also connected to Alcatel ISDN. There is IVR on CUCM/CUC. IVR works fine on CUCM and VCS VoIP users. But users, called from ISDN to CUCM c...
HI, In my IP Communicator Version 2.0.1.02, intercom line is not displaying.and all configuration is correct.
Hi all We have been asked if it is possible to automatically pull log files relating to extension mobility activity on a daily basis from the system.We have a two EM servers in the cluster, around midnight would probably be a good time to pull them o...
Hello, I want to Schedule Backup of CUCM from the DRS GUI interface, but status shows: Update Failed. The configured date or time has elapsed. I Schedule Backup from CLI and its completes successfully. I see that 2 hours are show, the first o...
Hi,we instyalled a cluster of Expressway-E rel. X8.11.4, with 2 LAN port (internal + external). Expressway-E cluster has to forward https request to the CMS "Meeting Server Web Proxy" to allow WebRTC communication, so, as is clearly written in "Cisco...
Hi Guys,Hey... I want to install CUCM 11.5 with the OVA "cucm_11.5_vmv8_v1.1.ova" VMWare recommends to have 11.5 with VMWare version 9. I was thinking into grab the ova file form Cisco and Change it by myself line this.Here are my questions,. Is the...
Hi we have 11.5 cucm ,am using CIPC and configured extension mobility feature , when i pressed message button am getting HOST NOT FOUND .1.I changed the dns name in the url with IP address and changed in the Enterprise parameter also2.IN the CIPC ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-08-2024 04:49 AM | ||
08-05-2024 11:18 PM | ||
07-31-2024 07:07 PM | ||
07-31-2024 06:48 AM | ||
07-23-2024 08:08 AM |
User | Count |
---|---|
4 | |
3 | |
1 | |
1 | |
1 |