Unified Communications Infrastructure

I am running Prime License Manager Enhanced 11.0.1. I have what was a valid 340 count license file when it was installed on June 2 2016. The license manager says I am now running in DEMO mode which will expire in 34 days. How do I resolve this confli...

I'm removing an existing CUACA 10.5.2 from an existing CUCM 10.5 cluster and re-integrating with a new CUCM 10.5 cluster. I don't see this defined/overlooking in the 10.5 Admin/Install guide...is this supported? http://www.cisco.com/c/dam/en/us/td/...

Hi guys, I have some issue with the meet me number and conference setup in CUCM 8.5.1.12900-7. My setup is like this: I'm creating the conference with meet me number 32X, and it's working... after this i'm trying to connect to the conference by dia...

Hi I have to integrate the 2 Artist VoIP-108  cards with CUCM. Theses cards uses 2 IPs and 8 ports each. I follow this guide which explain the integration with Axteris to try to figure out how it has to be integrated with CUCM. https://www.riedel....

I am having issue with a CUCM 11.6 after upgrade the boot fails with following issues, I have attached a screen shot. I had the PUB and SUB's up but now all have same issues three different BE7k's . ANy help would be appreciated FATAL:Could not load ...

We recently upgraded from 10.5 to 11.0 to implement the Emergency Call Handler features. I have worked with the local PSAP to verify that they are receiving the correct ANI/ALI. However, PSAP callback fails with a fast busy. I've read through this PD...

We experienced that RTMT displays a window titled "Error" with the following message (see attachment): RTMT failed to initialize. Exiting... Log file ~/.jrtmt/log/rtmt.log ends with the following messages: 2016-XX-XX XX:17:03,453 [SplashThread] IN...

Hi Guys, since i had great luck posting here for my first question, i figure the second should be easy for you. We use CUCM 10,5.x jabber 11.5.x and up, IIS server on windows 2012r2 I have set up IIS server to host Jabber Pictures of users and its w...

I am receiving alerts from my CUCM 8.5 cluster about certificates expiring.   Cluster overview:   PUB (Call manager service is not started)   Sub 1 (Running TFTP service only)   Sub 2 (call manager service running)   Sub 3 (call manager service runni...

Hi expert, I have proplem with Cisco TMS 15, TMS 1.5.0.11, i enabled Provisioning mode, and add group/user, but when i want to add conductor 4.0 to TMS then not found Collaboration meeting room templates mode display on TMS web, please tell me why? M...

I obtained CUCM 10.5 upgrade DVDs from Cisco that I had ordered through PUT. When I tried to run the install/upgrade, I got the following errors. The DVD is brand new and I am using it first time. The DVD is in my local PC and mounted to the VM for t...

Getting Network Connectivity Error Have DNS forward/reverse all setup for subs Have Subs added as server in CUCM Validated DNS server are validate from other server on the host that are VMs This is for CUCM 10.5.2.12900-14 Validated correct password....

Unity Connection 8.6.2, I have System call handlers for my auto attendant, if I take the publisher off line to reboot it, or attempt an upgrade the Subscriber wont answer calls for the AA's.  I didn't check to see if it would allow regular users to l...