Hi ThereWe are going to upgrade our CUCM7.1.3 to CUCM 7.1.5. We have 1 pub and 2 subs.According to the Cisco document, once the software being installed, we just need to switch the version and the system will start and running with the new versi...
Hi ThereWe are going to upgrade our CUCM7.1.3 to CUCM 7.1.5. We have 1 pub and 2 subs.According to the Cisco document, once the software being installed, we just need to switch the version and the system will start and running with the new versi...
We have the CoS for Live Record set to a maximum message length of 3600 seconds but our recordings are cutting off at 20 minutes exactly. We are using a single inbox solution with Exchange 2010 and there are no mailbox size limits on the users. Any ...
Hi, We have CUCM 8.6 in use.I have created a Hunt Pilot and have the following question: Is there any possibility for the user of this Hunt pilot to forwarding this to other call number , I mean a possibility only for user and not for administrator ...
hello, we have a unity connection 9.1, and i have below questionwhen i am sending message to another user it ask me to spell the last name and the first name or the distribution list, when i spell the last name and first name still it doesn't recog...
Dears,I have two CUCM 7.1.5 servers with hardware MCS 7816I4, but i can't see the model number and firmware version of HDD. I just did a "show hardware" and "utils create report hardware" "file get activelog platform/log/.." CLI commands, but the inf...
Hi EveryoneI worked for a company in the past that you were able to dial *12345 as an example and by dialing that it would take you right to a users VM. I want to implement this feature at my new job and I wanted to know if someone could tell me what...
Hello,We are running on a CUEAC v8.5.1.5 and want to go to v9.1But from documents, before going to 9.1 you have to upgrade to v9.0.1So where can we download the v9.0.1 ?I cannot make a choice on the ARC site. Regards,Antra
Does anyone know what the backup and recovery process is for the CUEAC server application?
Was wondering if these phones are supported by the TSP plug-in on CUCM 7.1.5. As far as i can tell the phone model itself is supported in Callmanger 7.1.5 via the latest device packagehowever the tsp documentation available o CCO doesn´t reference t...
HiWe want to upgrade our Unity Connection running Vers. 9.1.2.11900-12 to Vers. 9.1.2.12900-11. After the "utils system switch-version" command on the CLI, we get the error "Sync after switch version failed". We already restarted the Server.How can w...
Hi EveryoneWe are in the process of moving our users to Unity Connection and my manger wanted me to find out is there like a rule of thumb when it comes to VM ports. We have 48 VM ports and we are going to have 1100 users once everything is done with...
On our WAN, we have WAAS (wan accelerators) in place that accelerate and de-duplicate data. When SFTP is used across the WAN, it completely bypasses the WAAS. Is it possible to use FTP instead of SFTP, so the WAAS can accelerate the CUCM backups?Sa...
Hi,We are planning integration CUCM with Cisco expressway for VPN less Jabber.But have few queries:a) Can Cisco expressway E be implemented on stick in DMZ zone with static NAT with public IP.?b) Is it must to have certification given by public autho...
Hi EveryoneI have several sites that I'm getting rid of some older CUCM 4.3 boxes and I have a question about CSS and PT. Currently none of the sites are connected by to a PUB & SUB setup, all the sites are independent of each other but when I remove...
Hi,In our company we bought a Cisco BE6000 and I’ve been assigned the job to configure all the appliances. I only have some experience with the CUCM appliance but they also want to use the Cisco Jabber functionality and they would like to use the cur...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 03-05-2026 02:18 AM | ||
| 02-24-2026 08:53 AM | ||
| 02-14-2026 10:42 AM | ||
| 02-11-2026 09:32 AM | ||
| 02-05-2026 02:22 PM |