I want to know if certain DN's can forwarded with the called number. When Caller A DN (111) Calls User B DN(222) which forwards to User C DN(333) . I want Caller A to see DN(222) on caller ID instead of Call A's DN which is what we see typically (1...
Forum Posts
Resolved! MTLS does not take effect
My expressway version is X12.6.1,Mutual TLS mode is on, both the CA certificate and the server certificate have been imported, then configured an dns zone with TLS verify mode is on ,also have TLS verify subject name, When I initiated the call, I fou...
Resolved! Cisco C8200 & C8300 Calls Per Second
Hello,Is there any information available about the max Calls per Second the Cisco C8200 & C8300 can handle?
HiGetting Below Error On Expressway-C Although I have configured Guest URL on CMS any idea why getting the status failed ThanksSanjay
I have two BE7K M4 servers, one hosting my publishers for CUCM, CUC, and CER, as well as one CUCM subscriber; and the other hosting subscribers for CUCM, CUC, and CER. All VMs are v11.5. About a month ago, the M4 hosting the subscribers died due to a...
Since the PIMG is EOL, I have a Unity Connection integration question. Is it possible to integrate Unity Connection via SIP to a Nortel CS1000 such that calls to and from voicemail will be delivered and MWI will light on the Nortel phones?I have che...
Hello,i've updated a VG310 from 15.6.3M6 to 15.9.3M9.Since then after every reboot "mgcp fax t38 inhibit" shows up in running-config. I don't want that config parameter.After a "no mgcp fax t38 inhibit" and save to startup-config it's gone but after ...
We have Cisco Attendant console 14.0.2.2225 and this very annoying issue.Our Receptionist operators are able to see the incoming calls but when they double click to answer, nothing happens, the call continues to ring and eventually dropped. The appli...
I see that the new CUCM 12.5(1)SU4 has a feature SSO Redirect URI for Webex Appshttps://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/12_5_1/SU4/cucm_b_release-notes-for-cucm-imp-1251su4/cucm_m_new-and-changed-features.html#concept_DF880...
Can I add a comment within a voice-port or a dial-peer and if so how?Something like where I entered "! 2024-04-01 last edited by me"What would be the command to do this?!voice-port 0/0/1! 2024-04-01 last edited by mestation-id name FamilyMedstation-i...
Anybody providing 3rd party application to Finesse REST and XMPP that have successfully deployed at V12.6.1 but hit problems uplifting to 12.6.2? Our proxy connects to REST okay with the application appearing to authenticate correctly but our agent d...
Resolved! Referred-by vs Diversion header
Hello, We are configuring MS Teams calling with Direct Routing. We see that transfers to PSTN are not working. In the INVITE message going to PSTN, we see a Referred-By header, but our provider says that they need a Diversion header to make the tran...
Resolved! CUCM 11.5 Overprovisioned
I'm working on a relatively small deployment in a 2 node CUCM cluster that is over provisioned by 1 phone. That phone was a test phone that can be deleted. There is already a temp license on the system that expired already before that temporary pho...
Hello dears, I hope you are doing well I would like to know if someone has had any experience in an integration between CUCM 12.5(1)SU8a and CUP 12.5(1)SU8. There is a CUCM cluster which we want to upgrade 12.5(1)SU8a. There is too a CUP server emb...
Hi folks,I seem to have an issue updating the user on the CUCM via AXL when there is an apostrophe in the user ID.I receive the following error: "Client received SOAP Fault from server: A syntax error has occurred."I tried to escape it, but haven't ...
