Hello,How would I call a telco service number beginning with a *, from a Cisco IP-phone connected to the UC540?I cannot seem to add numbers with * in the outgoing dial plan in CCA 3.2Thank in advance!Johnny
I have 2 analogue trunks and 3 sip trunks, 2 spa508 and an analogue telephone.Caller ID is received on the SPA phones for ALL incoming trunks, however caller ID is not displayed on the analogue phone for ANY trunk.Region is set to UK. The analogue (F...
I am being asked if this is even an option to be able to have two phones assigned to the same extension. User wants to have a phone at home and one at work.
Hello everyone,I've heard that with the latest UC520 firmware caller ID is now passed to the snr number. I've upgraded and do not see this happening, is there some config I must do? If so, could you please describe it.Thanks in advance!
I want to use in the headquarter an SPA-8800 to be conected with my Panasonic PBX using the FXO interfaces, and in the branch offices I want to use SPA-8800 to receive the extension from the Panasonic in an analog phone.How to configure the SPA-8800 ...
We have 3 blast groups setup on a UC560 and each was setup using the Telephony Setup Wizard. When calls come into the Blast Groups they show up on phones as "FOR: 398" which is the auto attendant extension. When the calls go to VoiceMail, the email...
Hello,We were using our UC320 with a wimax router/modem made by Zyxel and we had no issues related to the network only the bad Wimax reception. Now we switched to DSL and got a new modem made by D-Link. The internet access seems to be goin on and o...
Dear All,Continuing with the setup of my UC320W and SPA303s. I'm looking for translation of audio messages and menus for VoiceMail in french. Do you have any idea where I can change them?I'm also looking for a mean to change the localization of my SP...
How can we setup our system to show the call information for the line the we are monitoring. I have a 7975 that is monitoring several lines. I can tell when someone is on the phone (button red) but I have no idea who they are talking to.Noticed on ...
Hi All,So here is the scenario:Customer has multiple sites (6 to be exact). The main site is going to have 2 UC560's (one for corporate, one for small outlying offices). There will be two office larger outlying offices that have UC540's. These wil...
Hello,we have a customer with same configurationbut he has one problem we dont have:LAN Interface in LANWAN Interface in DMZ from ASAPing to external sites from UC over the IP Adresse of site no problem, over dns name not resolvable.Tried many dns se...
In the process of deploying a UC320W and we have a need to have two analog phones connected to the system. Is it possible to connect both phones to the FXS port and allow them to share an extension? These phones will have very limited function and ...
Hi There Folks,We have put in a UC540 to a client in a managed/serviced office and they are setup with SIP turnks for incoming and outgoing.They also have phones from the managed office provider, they currently have 4 extensions, and this means they ...
I have 4 desks that we are putting phones on that no one sits at right now. They are empty offices. What is the best way to configure phones so that each desk has a phone on it if someone wants to use it with out having to put in a username and passw...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: