Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hi we are implemented 9800AXI WLC, now wireless speed is very less, in the datasheet it was mentioned 5.2gbps, now getting the speed is below 200 mbps.i have tested so many ways but no luck. it is working in the local switching.anyone knows the solut...
Hi, We are running into this error " Unregistered 9800-CL can only be used in lab. For production usage, please register this device in 122 days. Failure to do so will result in a limited number 50 of Access Points being allowed post this". Everythin...
Thank you very much.We are building a wireless LAN network using AP3802i's Mobility Express.We use Mobility Express's internal DHCP to distribute IPv4 addresses to each client.Wireless APs and clients can be connected, but there is a problem with fre...
Hello All,Could someone please share me the csv file format that is used in location feature which I can use to assign tags to APs using access point MAC address.Please also share how I can add more access point to this newly created location later u...
Dear Experts ,i have one issue related to MR that we have integrated with WILAS Captive Portal to let User fills in info and do SMS OTP.everything works well , but we have one config related to user expired period , the users must re-authenticate aga...
We have a new deployment in which customer want to deploy the meraki wireless with the office365. Does meraki support such kind of things ?
Hi,we have ClearPass in our environment, can you please help on configuration steps in the Dashboard.my use case as follows:- once users connect to guest SSID, should redirect to ClearPass captive portal to fill the required information.- the user sh...
Does anyone know if the CW9163E-MR can mesh?I can't seem to find anything in the documentation.Thanks
Hey All,My MR AP(CW916I) device switched to repeater mode. I rebooted it, but it remained in repeater mode. I replaced it with an identical MR, which worked fine on the same port. I then tested the original MR on another port in the network closet, b...
Dear All, I got a question would like to ask as i'm currently using MS-240-12P with AP MR44 & 76 in bridge mode, endpoint to endpoint could ping and reach each other, and just wonder there will be no port blocking in bridge mode right as i checked in...
CLI agent: Error while processing NVGEN command: ... There is an impact to the management GUI + we don't know if running configuration is saved, due to the face each save action results in "CLI agent: Error while processing NVGEN command" warnings. H...
Hello Members, i have Site scenario, We have 12 Access point which is new Catalayst Series AP. Currently we dont have hardware controller. Its working in Embedded WLC mode. Access point itself working as controller. Now we purchased a new 9800 Seri...
I have a situation where I need to advertise WLAN1 along with our standard WLAN2 in one area, while the rest of the area would just have our standard WLAN1. Would the APs be able to roam on WLAN1 This is on AireOS 8.10.190.0 Example below AP group 1 ...
The following errors are logged on the Catalyst9120 AXI:ERR: rdpa_cpu_tx_port_enet_lan # 213: rdpa_cpu_tx_port_enet_lan failed. rdd_rc=120 tx_rdd_error_count=2049 What is the cause of this error and what should I do?
We have seen a very high failure rate for the AIR-AP1832i-B-K9 recently with no known cause. Some displayed a solid amber led and others displayed no led. After swapping out the AP with a spare, the spare comes online right away. Some just go down an...
