Hello All,I have configured following setup. ios10(CE)(g0/0)-----(gi0/0/0/0)XRV1(PE)(gi0/0/0/1)------------(gi0/0/0/1)XRV2(RR)VPNV4(10.10.10.10/32) and VPNV6(10::10/32) routes are present on XRV1(PE). RR gets VPNV6(10:::10/128) route but RR does not ...
Hello, does someone has experience with the following migration procedure? I would like to know if there are some prerequisites regarding the IOS XR version on the new RSP5. https://www.cisco.com/c/en/us/td/docs/iosxr/asr9000/hardware-install/hig/b-a...
Hi, We are using a vrf called inet for all peerings ("Internet in a VRF").We have the following issue with BGP.When we issue the command show bgp vrf inet ipv4 unicast inconsistent-as we receive the following error:% Failed to retrieve data from EDM ...
Hello, We are trying to upgrade from 7.5.2 to SPGISO0001, but fails with insufficient space error. We have one unit which is not in production and USB booted to 7.5.2, then tried upgrade, with the same error. Is there any fix to this? Thanks Below ...
Hello, i've got a port that is admin-down and i want to install an optic and enable transmit light. I've tried the commands below and i've got no light on the SFP.#config(config)#controller optics 0/0/0/0(config-Optics)#shut(config-Optics)#dwdm-carri...
I'm sending a framed-route attribute from Radius server to ASR 9k6. I'm Using l2-connected, DHCP initiated, DHCP server is local, but i'm passing framed-route via radius. I'm running IOS XR 6.4.2 The problem is I see the route is installing correctl...
NCS540 is not passing the benchmark 10G RFC test. The Benchmark test is failing all frame sizes. However, if I bypass the NCS540 network. I get not issues. I posted the Benchmark tests. One of them passes fine when I bypass the NCS540 devices. The ...
Hello everyone,can you help me on this?Are the A9K-2X100GE-SE cards works in configuration with A9K-RSP880-TR without issues or not. SE is higher version, but I believe it would downgrade to TR if paired with TR RSP?is that right?
Hello All,ios4----(g1)CSR1(g2)---------(g2)CSR2(g1)--------------(gi0/0/0/1)XRv3(gi0/0/0/2)----------(gii0/0/0/2)XRV4(gi0/0/0/0)-----ios5ios4 and ios5 are CE routers.CSR1 and XRV4 are PE routers. CSR3 and XRV3 are P routers.I have done MVPN configura...
Hello, some please share traffic shaping command example in cisco ios xr 6.3.3 I want to bind 100mbps upload & download traffic...
Hello All, I have configured following setup. R1 Gi0/0/0/0 Gi0/0/0/1 / \ Gi0/0/0/0 Gi0/0/0/1 R2----------R3R1, R2 and R3 are XRV9k. I am trying to understand h...
Dearswe have an alert on our monitoring system related to CoherentDSP interface i need to shut down this interface. I did shutdown on the interface and on the controller optics but i still see it on my monitoring system. how i can shut down it?Cohe...
Hi Community,hopefully I can link here this post from Network Management Topics, any help or direction would be highly appreciated.[IOS-XRv ASR9000v] How to send correct SNMPv3 Informs (AuthPriv mode)? Thanks in advance & have a nice day!Vincent Vlk
how to verify TCAM ASR9K IOS-XR ?please help me
Can someone assist me.I have created a bootable USB with ncs540-usb_boot-7.x.x.zip. I moved the zip file to the USB and extracted the ZIP file and moved boot & EFI folders to the root of the USB I insert to the router, power it on, break the boot by ...
