Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,I am going to prepare my CCIE Collaboration lab v4 with minimal losses, can I use my CCIE voice v3 lab.Can I install CME v9 on my router 2811? If yes, what I need to uprgard in my router?I already have these equipments what I should provide ex...
Hi guys. Im testing a new network over a vpn and ran into an issue with my 7942. The phone has access to CM with ports open for services like tfp and sccp. It downloads the image and boots but then has an x next to the logo.Im guessing becasue it ...
can some one please let me know the defference between translation pattern and transformation patter please.Thanks.
Hi AllI have an issue with calls hitting my CUCM 7.0 from a Cisco 3825 Voice Gateway. I have a PBX connected via E1 to the 3825 VG and at present I can call from the CallManager to the PBX through the 3825 Voice Gateway with no problems. However I am...
Hello:I have an issue with videoconference SX20, when we turn off the TV, the audio is lost, but when we turn on the TV the audio doesn't return and we need to reset the videoconference to recovery audio.Video Conference: SX20Protocol: H.323Software:...
Hi Cisco Experts,Good day! Here is the scenario: We migrated the WAN link from Frame relay to IP VPN connection. We have successfully migrated the connection to VPN however, there is an issue on the VoIP calls. The setup is: IP Phones > CUCM > VG > F...
Hi evey body i configure Im & presence 9.1 and evey thing work fine . but when i want leave message for off line user , i got the error : message could not delivered . how can i solve this issue ? Kind Regard
I have set up a line group, like I have with many others before now, that has 5 phones (DN's) in it. It is set to ring as "Broadcast". However calls continue to ring only the one DN each time. Any ideas on what I may be overlooking? The Hunt List...
Hi all,Hope you all had a great weekendI have a query for restriction of call on the board lineHere is my issueWhenever we get a call on the company board line number we have a unity and there is a IVR prompt to reach the exact extension ( DN) or if ...
I am presently upgrading a location from Avaya to CUCM 8.5. I have an enviorment that requires an external bell for a specific extension that is used as a hot line. I am trying to determine how I can get an incoming call on the hotline, to ring simul...
Hi,Can you help us with ATA187 fax issue? Outgoing calls does not work. Ingoing calls work. I have seen this documenthttps://supportforums.cisco.com/docs/DOC-25210But I didnt find our call flow situation. Our call flow isTelco - PRI - GW - H323 - CU...
I am trying to access our Unity Express Software. I have recently taken over this role and was told we were using this software. I need to add a new phone / user to our phone system. I don't know where/how to access this software. I was told an I...
Dear Team,In Our VG224 some extensions are not working proprly(Totaly Dead), i just want to know how can i trobleshoot this issue.Regards,Prafull S.
Hello,I've 2 * 8945 phones on a remote location with around 230 ms delay and bw 10 MbpsI've upgraded 1 phone without any problem but the other phone fails when reading the fw file onto my Publisher TFTP. Even when trying a first step upgrade fron 9-1...
Dears,I have a site with CISCO2911 router (Version 15.1(4)M3) running a CME with IP phones 7945.These site had a 2mins power cut and after power restored all the phones was displaying CUPMUsers: in the phone screens.I don't know why this happened, i...
