Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi there.Is possible to configure a timer for fxo disconnect. What i need to do, is to cut the communication at 4 minutes taking.RegardsCarlos
Hello,I'm setting up a Unity Connection subscriber account and for some reason I can't get release to switch working under their transfer options. If I select supervised transfer, the line on the CUCM side will ring. When release to switch is enabl...
Hi to all, i am newbie on Ip Telephony, i would like to know if there is a way i could edit the network settings through web (http://IP_phone) on the 6921 ip phone, if you ask me why, i would tell you that i would like to disable the voice vlan setti...
I am working with some users and when they try to do an Ad-hoc conference using the software conference bridge the call drop then the conf. softkey is pressed to join the calls together. I have verified that the calls are using G.711 and that the CSS...
I have a problem in deploying AutoAttendant function on the Cisco2921 CME router, When I configure the incoming dial plan to go directly to auto attendant, the caller goes trough AA and then dials an extension or waits for the operator, if the IP ...
Is there a way to grab the incoming caller ID and based off of that caller ID, send the call to a different extension? We have an issue with a large banking institution (Bank of America) faxing a credit processing report several times a day to one o...
So here’s the scenario. I have an H323 gateway and for whatever reason Dial-peer selection is making my head spin. The gateway is connected to the PSTN and also to another PBX to act as a tie between CUCM and the legacy PBX. My hope was the following...
Hi,I am using a 2911. I have two scenarios; one successful and the other not.When I call the PSTN number on the FXO port from my mobile phone, the call gets established successfully.When I use a landline to call the same number I hear one ringback an...
I was wondering to know how I can setup the callerID outbound calls and inbound calls when we have two different DID's ranges and we have 3 digits as an extensions which 4 ranges that start with 3, 4, 5, and 6 will overlap with another DID's range.Fo...
HI AllI have a CME setup in my home and have run into the worst client in my wife. She refuses to dial 9 and wants the system to present all of the features of Vonage including caller ID and broken dialtone or stutter when a VM is left for the line....
hello i have a problem with cisco unity express auto attendant , i get a busy signal when making call to AA extension debug ccsip all:Mar 13 12:48:42.757: //-1/xxxxxxxxxxxx/SIP/Info/sipSPIAddContextToTable: Added context(0x2B83DFD0) with key=[16958] ...
Hello!We have telephony server based on asterisk Active Directory domain. All ip phones are cisco and lynksys.How I can create one phonebook for all ip phones and syncronize it with user name updates using asterisk or AD services?
Hi, My client has made 2 greetings on his VM account which is associated with Cisco Unity Connection.The greetings are for Afterhours and Buisness hours. My client uses Extension Mobility feature to login on phone He want these greetings to be played...
Dears,One of our customer recently upgraded their CUCM from version 4 to version 8.5. And after the upgrade "Conference" button on Cisco Conference Station 7936 is not active, we have tried three more conference stations 7936 and all of them have sam...
i am deploying CME 8.6. I have followed all the steps recommended by cisco to change the background image for cisco 7975G.i have created the directory as Desktops/320x216x16 and using a .png file with 320x216 and 80x53. All the files have been upload...
