IP Telephony and Phones

Hello Friends,Can you help me with one of the issue that I am facing currently.When ever I am dialing the numeber from external network it's hitting my gateway but won't able to hear the ringback.On gateway provider is sending correct digit.Normally ...

Hello,I followed the below guide which worked out great on my PRI circuits.https://supportforums.cisco.com/docs/DOC-18367Does anyone know for incoming calls on a T1 CAS if I would define the ingress Filter CSS on the device information calling search...

                   Hi,                       I have a quick question on AAR. In our country DoT regulation says IP & PSTN Calls should not mix. In AAR, if i make a call to branch office, it will go in IP network, if i want to conference the call with...

Our system has an active/active Cisco Unity Connection 8.5 install and I noticed today that there are several messages in the default Undeliverable Messages mailbox. This mailbox has not been monitored over the last few months and I will be taking re...

                   Hello, is there a possibility to give the 69XX or 8961 Phone a Display Info when the Phone is in SRST mode?The system messages in voice register global and call-manager-fallback seems to be not supported for this Phonetypes.br Mich...

I've this problem,I've two phones  one SCCP and one SIP phone.I'ts possible configure the callmanager express to ringing the two phones at the same time:This is the actual configurationvoice register dn  205number 6205call-forward b2bua all 6513  cal...

Hi,I have a new 2911 VSEC/K9 bundled router which is running IOS c2900-universalk9-mz.SPA.151-4.M4.bin. I have configured CME as Cisco recommend. I enable EULA I found this below error.CME licensing (cme-srst) feature enabled with no license installe...

Hello.I deployed a CCME 8.0 with CUE 7.2. with a SIP trunk to make calls to the PSTN. There is an auto attendant in the cisco unity which lets dial by number or name or transfer to operator pressing 0 number. When the AA transfers an incoming call to...

HiI have cisco 9971 ip phone with camera. is it possible to configure it such a way by default it doesnt only voice call and no video and if required it does video call through softkey.