Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear frnds.how can we get an information about how many times the users are getting High traffic notification and not able to make the calls. as we are running multi tanent env. and we have multiple BRI (2 channels) lines. i want to know how many tim...
In cucm is it possibel to combine in soft and hard conf resources in a single MRG and will that cause any issue? Appreciate your replies.Thanks.
Probably an easy one for most out there, but how do you apply toll restriction for an individual phone on the UC540. We need to prevent one extension from dialing 1+ calls.
Hi ,I have just installed and configured CUCM 8.5 and i 'm using the following items :1- Cisco Ipphones 69612- Cisco Switchs 2960 PoeThe customer want to implement the following items for security :1- Authentification 802.1X for the Ipphones ( th...
Hello,we have some Cisco 9971s with firmware sip9971.9-1-1SR1, registered on a CUCM 8.5.1.10000-26 cluster.We have an issue with conference: when a 9971 calls a first extension, then it press Conference button and calls a second extension, it can't j...
How I can create a user whit permission to create, delete, reset phone in the Cisco Call Manager version 6.But this user should only access this area, phone administration.
I Have a problem calling this one 800 number. When I call it from my office the number just rings. When I call it from a phone outside my office the greeting picks up right away. I used to be able to call this in the past. I can call other 800 number...
I am working a trouble where the users are call forwarding their outside lines (cell, home analog) to their DID. The forwarded call will ring at the Cisco set and then instead of transferring to VM as it should, it gets the "Welcome to Cisco Unity" g...
All,I have a question about the PC port on Cisco IP phones (in particular the 7962G, 7942 and 7911). We are in the process of a large VOIP deployment and will need to run new CAT 5e/6 cabling to areas where there are limited data connections as well...
Hello, I am migrating a number of DIDs from a Nortel DMS environment to a Cisco IPT environment. After the numbers are ported from the carrier, I log into the inbound gateway, start an ISDN Q.931 debug, manually dial the 10 digit DID and monitor whet...
Hi,i am starter to VOIP.we have a core swich and few access switches connected to it. THe phones are daisy chained with the PC's on the access switchpc ------> phone -----------> switchpc is a different subnet and phone is a different subnetso the co...
Hey everyone,I need to upgrade a UCM that has 6.1.2 on it to support the new Cisco ATA 187's, what is the most stable verison I should upgrade to? Thanks
Im having an issue and I cant figure out what Im missing.CUCM with h323 Gateway to a 2851 router.Route Pattern sends to the digits to the h323 gateway.Dial Peer picks it up and routes it to he local Serial Port (PRI to Nortel)Works perfect.I put in a...
I have CUCM 8.5.1 cluster and i activated the service dialed number analyzer on the servers and it all activated and started but when i try to use it form serviceability tools menu i can't find it , any one can help ??
Hello,does Cisco 9971 support BLF for call lists?It supports correctly BLF speed dials, but it seems it doesn't works with call lists, corporate directory, ...Regards.
