Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I have H323 Gateway configured as Gatway with UCM8.0. from some outgoing calls specially to mobile calls, we can't hear ringback on iphone until the called response.for outgoing calls to fixe PSTN number, we hear the ringback.for incomming call...
I've had a request to reconfigure the 'New Call' key on a 7960/61/62/40/41/42/12 to become a speed dial for our Help Desk.I've looked around the softkey layout and need to add a speed dial key to the unselected softkeys.This is on CUCM 6.1. Does anyo...
We are facing problem in Cisco IP Phones 7941 G in Vlan Communication, We are having 2 Vlans for IP Phones Vlan 97 and Vlan 100, problem is, few IP Phones which are currently on static IP's are not working over Vlan 97, when we configure them for DHC...
Hi,I have a customer that is using Unity and Unity Connection both in their environemnt. They say that they are using Unity for Unified Messaging.Does that mean that they are using Unity Connection for voicemail and Unity for Unified Messaging?Why w...
HiHi What is mean CCN ( ex: ccn subsystem sip in Unity Express ) ?
The end user on each access switch will just plug-in to the ports directly to their computer. the IP Phone is provided to their room..Things to achieve are the following:Router: 1. Load Balancing from 2 or more ISP providerCore Switch:1. Data and Voi...
I was wondering if anyone could shed light on how to resolve the error we are receiving on 2 of our Cisco phones. They worked on our network fine up until I changed the TFTP IP address manually as we wanted to use them remotely through a 871 integra...
Hello, i have configured mtp gw's to be used with a SIP trunk but how can i check on the mtp gw itself that it is used by the trunk ??Cheers.
Hi,Can a CUE user access his/her voicemail account via web... in the same fashion as ciscopca for unity connection or unity...Please Advise...
Hi All;I have to cases for upgrade, in the first case I am going to do upgrade for hardware and software for the call manager, so I will install the latest call manager (version 8) on a new hardware, but I am not able to know what is the best method ...
Hello all.I have the following problem with 2800 series router running CME 7.0. In the phone dir in flash i can see the firmware files for 7941 IP phone. I made those files available from tftp router service using alias. When i´m going to set the loa...
we have 4 phones with the same number on the second button, and after 2 phones are active on the line, the 3rd call that comes in goes to voicemail yet there are 2 other phones that can answer if presented. is this a system limitation.
We have the following:Analog device ---fxs—gateway---h323—ccm 6.1.3Analog device is connected to FXS port in Cisco 2821 H.323 gateway 12.4(11)XW Advanced IP services, to Call Manager 6.13. When the Analog device sends/performs a hookflash transfer b...
since CUCM on UCS doesn't support USB, it seems that an MCS server has to be deployed to accomodate the USB sound card, has anybody have other idea? such as retrieve the audio stream from a router voice port, like what CME does.thanks!
Hi!As the AA is a CTI RP (pointing to Cisco Unity Connection), CUCM does not allow that "extension" to be part if the LG. How can the AA be made the gateway of last resort if nobody answers in the LG?CUCM version is 7.1.3 and CUC is 7.0thanksAnna
