IP Telephony and Phones

HelloI have identified the listed bug in our CUCM 4.2(3)sr4a, the work around for the bug is to ignore the issue.Does anyone know if there is a fix for this bug?Thanks

My customer would like to see which member of the of the pickup group she is in is ringing, so she can announce 'Mr X's office' to the caller when she picks up. SD/BLF with pickup may be the best way to go, but is there any option within pickup grou...

All,Can I configure voice gateways to log or provide stats on all the incoming and outgoing calls?Thanks

I was wondering if you are able to ad-hoc conference a meet-me dn that already has a meet-me conference established. You can do this in CM but I have not been successful doing this in CME version 4.1. I am using hardware based conferencing and ad-hoc...

We have ext. 9145 and It delayed more than 10 seconds when we dialed internally from and internal phone. It is connected normally when it dialed from external number.We had few 9xxx DID. But this is the only one that having issue since this is the ...

Hey guys --I have a new MCS7825-I4-IPC1 and I'm trying to install Unified Mobility Advantage; however, during the very beginning of installation the install says that it's unable to find the media to install the software, and to please install the dr...

In Unity 4.X there was an option that allowed you to transfer to an extension after the greeting was played. Now in Connection 7 I have some call handlers that I need to transfer to PSTN after the greeting has played . Any ideas?

I have a customer that would like multiple pre-recorded greetings on a call handler. They would like to be able to use the greetings administrator to change these messages as needed based on the day (weather conditions, etc).It appears that you can...

Hello, i have an issue, i need to deploy DECT technology inside IP infrastructure,with CUCM 6.0i heard about KIRK, but can anybody help with other solutions?

Is there a way to reset all phone preferences (e.g. ringer volume, etc) back to defaults ?I'm using CUCM 6.1.3 with 7911/7941/7961 handsets.Thanks,GTG

Hi,Running CUCM 7.027911, 7942 handsetsWanted to secure some phones out of hours, was looking at doing some Time of Day Routing but wanted to users to be able to login to override the block.Does anyone know a way to force user login on phones before ...

Hello,We are designing a 520 Ip Phones UCC solution for a client, the LAN Switches we are proposing are 3750G-48PS and the 520 IP Phones we are proposing are 7945G.On the 7945G Product Overview page:http://www.cisco.com/en/US/prod/collateral/voicesw/...

I am trying to configure a 2811 to send calls from a pri to a sip trunk. I have a dial-peer built that seems to be working sip to sip. I am having trbl getting the call to go from int s0/0/0:23 out to the fa 0/1 port. That is connected to the sip pro...

Hi,I need some assistance in configuring the DID for a system.I have been doing some research and all documentation from cisco have shown that certain dial peers need to be configured Now what they have not mentioned is if it is MGCP or H323. Can any...

Hello,My Call Manager System freezes on "activating swap partition".What can I do?My CUCM Operating System is Linux.Thanks