Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
For T1 PRI interface, I show InStatus and OutStatus as NONE when I do a show voice port summary. The port is enabled. How do I get out of NONE status and back to IDLE so it can accept/make calls
Hello guys,Are there any functionalities or features that Avaya phone system offers that Cisco CallManager can not? I am replacing an Avaya phone system with Cisco Unified solution and would like to know what are the features and functionalities that...
Hi,We've had our CCME/CUE installation running for a couple of months now, but I've noticed that all the IP Communicator clients we have (on 2k sp4 & xp sp2) are all consuming a substantial amount of memory. They start of OK, around 55-60MB consumed ...
I have two voice gateways (2811 and VG224), both configured with MGCP. I am not using the "ccm-manager config server" command, to stop CM from configuring the gateway.I placed a fax call between both gateways, controlled with a CM 5.1(2)b. The fax ca...
I made a recent change and am unsure what, whenever people will leave a voicemail with a user it says Sorry "test test test" is not available which is a test greeting I recorded for a call handler. It won't paly there name they recorded, it will lea...
I have a gateway that can dial any area code with the exception of 502. When dialing 502 I get "The number you have dialed is not a working number" Below are the debugs from calling a non-working 502 number and a working 770 number. Worth noting that...
Is it possible to enter long distance codes in a CFwdAll from a phone?
All, I uploaded some loud ring tones to the TFTP site on my CCM 5.1 box and edited the Ringlist.xml file. Then I had reloaded a 7921 and a 7940 phone to see if I can get those Ring tones on the phone. They did not download or install. How do I get ...
Hi guys, Quick question for you. If I want to do the upgrade from 5.1(2) to the 6.0(1a) available on CCO, can I just download the 6.0(1a) and upgrade via the OS admin page? Or do I need to have the base 6.0 version on disk first and then download ...
Hi Can any one let me know how to integrate CCM 5.1 with Avaya S8300. Is their any doc interoperability doc available for the same
Every 3-4 weeks we have a strange issue: video communications between our regions fail with VTA and are of bad quality with 7985.We restart the Call Manager service on the publisher and the subscriber and the problem temporary is fixed.Any idea for a...
I have a TAC case opened up already but things are moving slow so I wanted to put out some feelers. I have to clusters. One was an upgrade from 4.1(3) and one was a new 5.X install. Now they are both running 5.1(2). I have been noticing some stra...
The ephones for VG224 don't get registered with SCCP on the gateway. I've already done the ATAs and the IP phones, and they seem working fine. I'm having some unluck with the VG224. I beleive the problem is from the VG224 itself. The config of this d...
HI,I'm running the CCM 5.1.1 and i'd like to know how to call-forward using a schedule. For exemple: the calls from line 1 forwarding to line 2, from friday afternoon until monday morning and then return to line 1(monday morning). it is clear? Thanks...
Two brand new 7961G phones are registering but not upgrading phone loads, no Local Directory, wrong time, etc. Ideas?
