Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,We got a project with a customer who wants to connect a few modems / fax machines with a VG224.What are the up an downs with this solution(CCM 5.x -- SCCP -- VG224) ?Can the VG224 provide a modem speed up to 56Kbbps?Thanks for your time.Greets...
Hi all,I have a client that has his IP Telephony solution running in Cisco CallManager 4.2. He has now purchased Cisco Unified Communications 5.1. I know there's is no direct upgrade from 4.2 to 5.1. So I'll have to rebuild the database to the new 5....
What are the ports that the Cisco IP Communication use? I need the number of the ports to open these ports in the firewall.thanks
Hi,I presently have a CCM5.1 system connected to a Cisco 2811 router running as an MGCP gateway for PSTN access via an ISDN30. We have CLI enabled by BT so that we can see who is calling us and this is working fine, apart from BT strip the leading 0,...
Hi thanks for your previous responses it was helpful ,so i wanna know if it's possible with CME to group together some PSTN lines, let me explain; as example i have 4 PSTN's numbers or line each of them are connected to my FXO card and i want to setu...
We recently installed a CME/CUE (4.1) system and are having difficulty with the transfer functionality. If we turn on transfer-system full-consult, it appears that the person who made the transfer is calling you even if they hang up and blind transf...
Cisco Unity Express Version 2.2I can't seem to get the time set correctly on the 7960 phones we have. I have set the clock on the router which host the Call MGR software to the correct time and also have set the correct time in the admin panel of the...
Hi all, i have installed CCM 6.0 but i have problems with installing DHCP server. My CCM is on 192.168.150.0/24 network, 1.what should i enter on Subnet IP Address field. 2.Should the DHCP Subnet be from CCM 192.168.150/24 network or another. Thanx...
In CCME 4.1When a call comes from fxooperator answerscallerID appearsthen operator transfers to any ip telephone, it shows operator telephone#instead of outside callers.
I have tried to follow the configuration guide for meetme conferencing. When i hit the meetme softkey and enter the number (888) I get the message 'no conference bridge' on the IP Phone. three-way conference calling also does not work (unable to crea...
Hi!How can I get a telephone numbers list of all the telephones associated to a CallManager?I would like to have something like this: a telephone numbers list where numbers and users are associated.example:"1111 , Maria1112 , Peter"Ana
In below debug isdn q931 is the unallocated/unassigned because the calling party number says “local number�In this case the Castelle fax press is dialing my home fax machine at 919043399696 I'm guessing this Castelle fax press sending local numb...
Hello All,Has anyone run into an issue where call history just disappear on its own ? To my understand call history is cached in the phone and it will disappear if the phone reset but in my case it just disappear all of the sudden.I am running CCM 4....
Whenever I dial into a phone or have the phone dial out it's always a one way conversation. I can never talk on the IP phone and have the other end hear it. The other end can always talk and it will come through the IP phone. The network topology ...
Pls anybody clear my doubts:- is the same local loop carrying voice call ,i.e. analog signal is used for carryng digital signal in ISDN implementation or different set of wiring is used to carry digital signal from customer site to CO.?
