Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
how i will get the DC directory (LDAP) password from my cisco callmanagerkindly reply thanks in advance sunny
Hi all I am having the strangest thing ever, i did reset for GUI CUE administrator password according to Cisco documentation, when logging with the new created administrator i get the Lost Contact page telling me that there is no connection between C...
I am trying to figure out the relations between IVR port verses CTI port and CMT channel. I have IPCC Premium with 300 IVR ports. My understading is that when a call is sent to a route point, IPCC uses 1 IVR port for the CTI port to process the cal...
Hi friends,i must configure SRST on VG224 that work as MGCP on CCM. I found some guide but they don't satisfied me. Someone can help me? my release is 12(4)6T7. I see that is possible to configure call-manager-fallback. I can configure it like a 28xx...
Hi, I'm going to buy some call managers for a lab. i'd eventually like to study for the lab, but not right away. can anyone tell me which version of call manager they think I should buy? I'm worried that if I buy 4.3 for my home lab, it will becom...
We have just deployed centralized UPS solution but starting with Linux Appliance there is no possibility to install UPS agent under OS. We've tried to make script and execute "utils system shutdown" command from Windows using SSH and PuTTY, but unfor...
Can anybody tell me if Cisco Attendant Console works with Cisco UCM 6.0? I have been told it is not supported with 6.0, and that you need to buy a 3rd party software app in order to get the Attendant Console features? Is this true?Thanks,Ben
Does somebody knows if an MGCP GW can sends a # key after any number in a PSTN call? Does any GW debugs shows this # key?
Hi,Can anyone help with this. I have setup a 3845 voice gateway. Inbound and out bound calls work fine. However on inbound calls the full ddi number does not show only 90. I have run a debug isdn q931 on the gateway and made an inbound call. Callling...
Hi,i have the CCM 5.x inside a NAT with somo phones on SCCP and SIP, and they are working fine. But i need to have a phone with sip outside the nat.What configuration do i have to put on the phone and on the router?I'm not getting very sucessfulAndre...
Hi,I have CCM 4.1(3). We have configured Cisco IOS Conference Bridge on 3845 router. Device pool applied is Default with Codec G.711.Following are the details collected from 3845.IP address of my phone is 10.10.34.20.10.50.254.2 is Voice Gateway. I i...
I am beginning to implement the new 7941 and 7970 phones on our network (currently have about 30 installed). I notice that every once in a while (not sure on the exact timing - maybe every two hours?) the phones go into "registering" mode. The phon...
Hi all, We have a CM 5.1 cluster spread over two core sites. Phones registered with the subscriber are unable to get outgoing calls. Caller gets re-order tone as soon as they hit outside line code "0". Also affects phones when they failover from publ...
hi folks,i have ccm 4.2 and i want to integrate it with a call logging software for billing purpose.what configuration is reuired on call manager to send data to this call logging software.thx,
I wonder that why i must order Unit License for IP Phone? May I use IP Phone without Unit License for it.
