i am a developer of switch manufacture，lldp is being developed in our new product, and we are ready tosupport Cisco CDP too. I just wonder how Cisco give license of private protocol such as CDP to othervendors?
Hi,I'm facing below mentioned problems in LMS..1. Unable to get the Devices configuration: Pls tell me how can I get the device configuration from CWLMS 4.0.2. Unable to schedule the device discovery: Pls tell me how can I scheduling the device disco...
Hi How can I make LMS distinguish between lan-lite and lan-base models of 2960 switches?We have seen LAN BASE images beeing deployed to LAN LITE 2960 switches!ThanksLasse
I want to recover the name of the SNMP VRF on my router CISCO 7206VXR-NPE-G2. IOS : (C7200P-ADVENTERPRISEK9-M) Version 12.4(24)T We have no access to get information about the OID 1.3.6.1.3.118.1.2.2.1.1 (nzme of VRF)Do you have a solution to get it?...
Hello,DFM with LMS4.0.1 got all wanted devices and is working fine so far except of we cant do settings on Polling & Thresholds, because we cant select anything:How can we solve the problem? Many thx for hints in advance,Steffen
Hi Device center take +5min to load.I have attached some thread dumps, that I saved earlier.Any ideas for solving this is much appreciated.Thanks Lasse
I am a network engineer working for a Cisco Silver partner for 3 years now. I have done a number of CiscoWorks implementations in which i got the chance to learn the CiscoWorks LMS server. Since I did not find any post making some suggestions, i thou...
Hello,I have been working on using EEM and TCL to copy multiple files (starting with file.x) from flash to an FTP server and once they have been copied, i want to delete them from flash. For example:sho flash | i file.x211 33 Jun 18 2011 00:3...
Hello.I need to create a script for a couple of routers.Today, when a WAN link goes down (POS1/0, and a syslog message is generated) the event-manager shuts the LAN interface G0/0 to administrative down:event manager applet monitor-down event syslog ...
When trying to launch the CWA server setup workflow, the following error comes after taking a long time saying Collecting existing server information. Please wait.. -CWA0: Could not fetch the error message from the database.CWA database engine may no...
Hello,I have a Cisco LMS 3.2 and it is up and running. The problem is that I coudlnt figure out how the topology services figures out the network topology that I have. So my questions are: 1. How does the topology services map the network ? 2. How co...
Hello,We got suddenly a lot of Voltage faults in DFM from 10GE ports at our VSS Core. Communication is not affected.All other devices show voltage in a valid range and the VSS before this night as well.An "shut / no shut" of the interface doesnt help...
Hi,Can someone help me with integration of CUOM 8.0 to CUCM 8.0 please. I have done everything shown in the link below with no luck, not sure if i'mmissing something:http://www.cisco.com/en/US/docs/net_mgmt/cisco_unified_operations_manager/8.5/user/g...
HI I have LMS 3.1 with HUM 1.1.2 installed in my network.I am facing two problems while analyzing the HUM interface utilization reports.1) Few Gig interface's utilization reflecting under ifHCInoctets & ifHCOutOctates as well as in ifInOctetes & ifOu...
